Cone size [mm]: | 15.1 |
Distance between fixing holes [mm]: | 80 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mounting points diameter [mm]: | 12.2 |
Number of fixing holes: | 2 |
Required amount: | 2 |
Type of admission: | TÜV/GS tested |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mounting diameter [mm]: | 18 |
Overall height [mm]: | 71 |
Cone size [mm]: | 16.8 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Height [mm]: | 84 |
Length [mm]: | 87 |
Cone size [mm]: | 14.55 |
Distance between fixing holes [mm]: | 80 |
Features of execution 8: | Without reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower, Upper |
Mounting points diameter [mm]: | 12.2 |
Outside thread [mm]: | M12 x 1,25 rht m |
Required amount: | 2 |
Rudder type: | For wishbone |
Cone size [mm]: | 20 |
Features of execution 8: | With protective ring |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Required amount: | 1 |
Weight, kg]: | 0.4 |
Cone size [mm]: | 15 |
Cone slope: | 1/10 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | 2 x m12 |
Diameter [mm]: | 45, 46,6 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mounting diameter [mm]: | 20 |
Outer thread 1 [mm]: | 16 x 1,5 |
Overall height [mm]: | 105 |
Technical information: | Ball joint |
Height [mm]: | 101 |
Length [mm]: | 74, 74.1 |
Location: | Front axle |
Thread size: | M16x1.5 |
Thread size 1: | M16x1.5 |
Height [mm]: | 85 |
Length [mm]: | 130 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Thread size: | M12x1.25 |
Thread size 1: | M12x1.25 |
Height [mm]: | 83, 83.1 |
Length [mm]: | 146 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Thread size: | M12x1.25 |
Thread size 1: | M12x1.25 |
Cone size [mm]: | 15 |
Cone slope: | 1/8 |
Diameter [mm]: | 40 |
Features of execution 8: | Special mounting hardware required, With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | Circlip |
Outside diameter [mm]: | 40 |
Recommended special tool number: | R10081 |
Thread size 1: | Mm12x1,5r, Mm12x1.5r |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mounting diameter [mm]: | 18 |
Outside thread [mm]: | 14x1,5 |
Overall height [mm]: | 90 |
Cone size [mm]: | 16.8 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Thread size: | M12x1,25 |
Additional Information: | With accessories |
Car with left- / right-hand drive: | For left / right hand drive |
Cone size [mm]: | 16.8 |
Cone slope: | 1:8 |
Length [mm]: | 110 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Cone size [mm]: | 15.1 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Thread size 1: | Mm12x1,25r |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outer thread 2 [mm]: | M12x1,25 |
Outside diameter 1 [mm]: | 40,3, 40.3 |
Weight, kg]: | 0.376 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mounting diameter [mm]: | 20 |
Outer thread 1 [mm]: | 16 x 1,5 |
Overall height [mm]: | 95.5 |
Overall length [mm]: | 148 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.