| Location: | Rear axle |
| Location on the axis: | Upper |
| Packing height [cm]: | 5.1 |
| Packing length [cm]: | 7.5 |
| Packing width [cm]: | 5.1 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
| Inner diameter [mm]: | 14 |
| Length [mm]: | 54.9, 55 |
| Location: | Rear axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower, Upper |
| Outside diameter [mm]: | 47, 47.2 |
| Amount required 2: | 3 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
| Packing height [cm]: | 2.1 |
| Packing length [cm]: | 4,1 |
| Packing width [cm]: | 4.1 |
| Weight, kg]: | 0.01, 0.015 |
| Equipment option: | Plus kit |
| Features of execution 8: | With reinforcing material |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower, Upper |
| Manufacturer restriction 2: | Circlip |
| Cone size [mm]: | 13.6 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
| Weight, kg]: | 0.44 |
| Cone size [mm]: | 17.6, 18 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
| Diameter [mm]: | 51 |
| Location: | Front axle |
| Location on the axis: | Upper |
| Mounting diameter [mm]: | 16 |
| Outside thread [mm]: | 14x1,5 |
| Overall height [mm]: | 95 |
| Cone size [mm]: | 13.6 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
| Mounting points diameter [mm]: | 11,6 |
| Outside thread [mm]: | M12 x 1,25 |
| Spanner jaw width: | 17 |
| Weight, kg]: | 0.4 |
| Cone size [mm]: | 12.9 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower, Upper |
| Outside diameter [mm]: | 33.4 |
| Outside thread [mm]: | M10 x 1,25 |
| Required amount: | 2 |
| Weight, kg]: | 0.19 |
| Additional Information: | With accessories |
| Length [mm]: | 28 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
| Thread size: | M12x1,5 |
| Thread type: | Right hand thread |
| Car with left- / right-hand drive: | For left / right hand drive |
| Cone size [mm]: | 18 |
| Cone slope: | 1:8 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
| Thread size: | M14*1.5 |
| Cone size [mm]: | 12.2 |
| Cone slope: | 1/8 |
| Diameter [mm]: | 38,5 |
| Features of execution 8: | Special mounting hardware required |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
| Outside diameter [mm]: | 38.5 |
| Recommended special tool number: | R10079 |
| Thread size 1: | Mm12x1,25r, Mm12x1.25r |
| Cone size [mm]: | 16 |
| Cone slope: | 1/8 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
| Weight, kg]: | 0.57 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
| Packing height [cm]: | 6,985 |
| Packing length [cm]: | 13.8 |
| Packing width [cm]: | 8.4 |
| Weight, kg]: | 0.634 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
| Outside diameter [mm]: | 33.4 |
| Outside thread [mm]: | M10 x 1,25 |
| Required amount: | 2 |
| Weight, kg]: | 0.19 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
| Diameter [mm]: | 39 |
| Location: | Front axle, Rear axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower, Upper |
| Mounting diameter [mm]: | 15 |
| Outer thread 1 [mm]: | 12 x 1,25 |
| Overall height [mm]: | 80 |
| Technical information: | Ball joint |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.