| Build type: | Pressed |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Outside diameter 1 [mm]: | 44,65 |
| Outside diameter 2 [mm]: | 55,5 |
| Required amount: | 2 |
| Additional Information: | With additional materials |
| Bolt diameter [mm]: | 18 |
| Cone size [mm]: | 18 |
| Hole diameter [mm]: | 8.5 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Number of fixing holes: | 3 |
| Required amount: | 2 |
| Type of admission: | TÜV/GS tested |
| Cone size [mm]: | 15.8 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Outside thread [mm]: | M14 x 1,50 rht m, M40 x 1,50 rht m |
| Type of admission: | TÜV/GS tested |
| Cone size [mm]: | 16 |
| Diameter 1 [mm]: | 16 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Type of admission: | TÜV/GS tested |
| Cone size [mm]: | 17 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Type of admission: | TÜV/GS tested |
| Bolt diameter [mm]: | 16 |
| Build type: | Pressed |
| Location: | Front axle |
| Location on the axis: | Lower |
| Outside diameter 1 [mm]: | 34,95 |
| Outside diameter 2 [mm]: | 39,5 |
| Required amount: | 2 |
| Additional Information: | With accessories |
| Bolt diameter [mm]: | 17 |
| Cone size [mm]: | 17 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Mounting points diameter [mm]: | 8.5 |
| Number of fixing holes: | 3 |
| Required amount: | 2 |
| Type of admission: | TÜV/GS tested |
| Additional Information: | With additional materials |
| Cone size [mm]: | 17 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Type of admission: | TÜV/GS tested |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Cone size [mm]: | 14.75 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
| Outside thread [mm]: | M14 x 1,50 rht m |
| Rudder type: | For wishbone |
| Type of admission: | TÜV/GS tested |
| Additional Information: | With accessories |
| Cone size [mm]: | 13.5 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Outside thread [mm]: | M12 x 1,50 rht m |
| Type of admission: | TÜV/GS tested |
| Cone size [mm]: | 14.5 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
| Outside thread [mm]: | M12 x 1,50 rht m |
| Cone size [mm]: | 19 |
| Location: | Front axle |
| Location in the car: | Left |
| Location on the axis: | Lower |
| Paired article numbers: | G3-120 |
| Type of admission: | TÜV/GS tested |
| Cone size [mm]: | 19 |
| Location: | Front axle |
| Location in the car: | Right |
| Location on the axis: | Lower |
| Paired article numbers: | G3-119 |
| Type of admission: | TÜV/GS tested |
| Cone size [mm]: | 14 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Outside thread [mm]: | M12 x 1,50 rht m |
| Bolt diameter [mm]: | 20 |
| Features of execution 8: | With protective ring |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Outside diameter 1 [mm]: | 50 |
| Outside diameter 2 [mm]: | 42,7, 42.7 |
| Required amount: | 2 |
| Rudder type: | For wishbone |
| Type of admission: | TÜV/GS tested |
| Cone size [mm]: | 20.3, 20.5 |
| Cone slope: | 1/10 |
| Inner diameter [mm]: | 11 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Mounting points diameter [mm]: | 11 |
| Number of fixing holes: | 2 |
| Outside thread [mm]: | M16 x 1,50 |
| Required amount: | 2 |
| Type of admission: | TÜV/GS tested |
| Cone size [mm]: | 15.8 |
| Cone slope: | 1/8 |
| Diameter 1 [mm]: | 16 |
| Location: | Rear axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Type of admission: | TÜV/GS tested |
| Build type: | Pressed |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Outside diameter [mm]: | 40.3 |
| Required amount: | 2 |
Welcome to the "Optimal Suspension arm ball joint" section on EXIST.AE! Here, you'll discover a wide selection of products and enticing offers!
Our online store showcases Optimal products for a wide range of vehicle models. Prices start from 33 PLN and can go up to 144 PLN. Our aim is to ensure that servicing your vehicle is not only of high quality but also cost-effective.
EXIST.AE ensures the convenience and reliability of delivering goods from the "Optimal Suspension arm ball joint" category. You can receive your order by FedEx air parcel.
On our site, for Optimal products, you will find detailed descriptions, high-quality photos, and reviews from real customers. This way, you get a better understanding of the product before making a decision. Furthermore, you can always share your opinion and leave a review, helping other users.
Our service, delivery conditions, and access to genuine reviews make the shopping process enjoyable and convenient!
Thank you for being with us and choosing EXIST.AE as your reliable partner in car care.
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.