| Inner diameter: | 65 |
| Inner diameter [mm]: | 65 |
| Location in the car: | Front, Timing End |
| Manufacturing material: | PTFE (Polytetrafluorethylen), Polypropylene |
| Material: | PTFE (Polytetrafluorethylen), Polypropylene |
| Outside diameter [mm]: | 79 |
| Part type: | Crankshaft oil seals |
| Required amount: | 1 |
| Weight, kg]: | 0.056 |
| Width [mm]: | 20 |
| Inner diameter: | 55 |
| Inner diameter [mm]: | 55 |
| Location in the car: | Front |
| Manufacturing material: | PTFE (Polytetrafluorethylen) |
| Material: | PTFE (Polytetrafluorethylen) |
| Outside diameter [mm]: | 68 |
| Part type: | Crankshaft oil seals |
| Shaft seal type: | Ab |
| Twist type: | Right twist |
| Width [mm]: | 8 |
| Inner diameter: | 90 |
| Inner diameter [mm]: | 90 |
| Location in the car: | Gearbox side |
| Manufacturing material: | FPM (Fluor-Kautschuk) |
| Material: | FPM (Fluor-Kautschuk) |
| Outside diameter [mm]: | 110 |
| Part type: | Crankshaft oil seals |
| Shaft seal type: | A sl |
| Twist type: | Left twist |
| Width [mm]: | 12 |
| Dust protection: | With dust-proof edge |
| Features of execution 8: | With mounting shell |
| Height 1 [mm]: | 8 |
| Inner diameter 1 [mm]: | 55 |
| Location in the car: | Front, Timing End |
| Manufacturing material: | PTFE (Polytetrafluorethylen) |
| Material: | PTFE (Polytetrafluorethylen) |
| Outside diameter 1 [mm]: | 68 |
| Part type: | Crankshaft oil seals |
| Twist type: | Right twist |
| Features of execution 8: | With mounting shell |
| Inner diameter: | 65 |
| Inner diameter [mm]: | 65 |
| Location in the car: | Front |
| Manufacturing material: | ACM (polyacrylic rubber), PTFE (Polytetrafluorethylen) |
| Material: | AFM (polyacrylic rubber), PTFE (Polytetrafluorethylen) |
| Outside diameter [mm]: | 79 |
| Part type: | Crankshaft oil seals |
| Shaft seal type: | A sl |
| Twist type: | Right twist |
| Width [mm]: | 20 |
| Features of execution 8: | With mounting shell |
| Inner diameter: | 65 |
| Inner diameter [mm]: | 65 |
| Manufacturing material: | ACM (polyacrylic rubber), PTFE (Polytetrafluorethylen) |
| Material: | AFM (polyacrylic rubber), PTFE (Polytetrafluorethylen) |
| Outside diameter [mm]: | 79 |
| Part type: | Crankshaft oil seals |
| Twist type: | Right twist |
| Width [mm]: | 10 |
| Features of execution 8: | With flange, With mounting shell |
| Height 1 [mm]: | 20 |
| Inner diameter 1 [mm]: | 90 |
| Location in the car: | Gearbox side |
| Manufacturing material: | PTFE (Polytetrafluorethylen) |
| Material: | PTFE (Polytetrafluorethylen) |
| Outside diameter 1 [mm]: | 140 |
| Outside diameter 2 [mm]: | 210 |
| Part type: | Gasket |
| Height [mm]: | 10 |
| Height 1 [mm]: | 10 |
| Inner diameter [mm]: | 48 |
| Inner diameter 1 [mm]: | 48 |
| Location in the car: | Front, Timing End |
| Material: | PTFE (Polytetrafluorethylen), PTFE (Polytetrafluorethylen) |
| Outside diameter [mm]: | 65 |
| Outside diameter 1 [mm]: | 65 |
| Dust protection: | With dust-proof edge |
| Height [mm]: | 8 |
| Height 1 [mm]: | 8 |
| Inner diameter [mm]: | 55 |
| Inner diameter 1 [mm]: | 55 |
| Location in the car: | Front, Timing End |
| Material: | FPM (Fluor-Kautschuk), FPM (Fluor-Kautschuk) |
| Outside diameter [mm]: | 68 |
| Outside diameter 1 [mm]: | 68 |
| Twist type: | Right twist |
| Dust protection: | With dust-proof edge |
| Height [mm]: | 12 |
| Height 1 [mm]: | 12 |
| Inner diameter [mm]: | 90 |
| Inner diameter 1 [mm]: | 90 |
| Location: | Gearbox side |
| Location in the car: | Gearbox side |
| Material: | FPM (Fluor-Kautschuk), FPM (Fluor-Kautschuk) |
| Outside diameter [mm]: | 110 |
| Outside diameter 1 [mm]: | 110 |
| Twist type: | Left twist |
| Height [mm]: | 10 |
| Inner diameter: | 48 |
| Inner diameter [mm]: | 48 |
| Location in the car: | Front |
| Outside diameter [mm]: | 65 |
| Part type: | Crankshaft oil seals |
| Width [mm]: | 10 |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.