| Coupling / mating type: | Constant-velocity joint |
| Location: | Front axle |
| Location on the axis: | Interior |
| Outside diameter [mm]: | 108 |
| Serrated connection box side: | 28 |
| Toothed joint on the differential side: | 28 |
| Coupling / mating type: | Constant-velocity joint |
| Internal gear connection on the wheel side: | 26 |
| Location on the axis: | Outer |
| machined: | With groove / notch in the inner part |
| Outer gearing wheel side: | 25 |
| Outside diameter [mm]: | 90.9 |
| Spacer diameter [mm]: | 53 |
| Wheel-side gear connection: | 25 |
| Coupling / mating type: | Constant-velocity joint |
| Location: | Front axle |
| Location on the axis: | Interior |
| Outside diameter [mm]: | 100 |
| Serrated connection box side: | 25 |
| Toothed joint on the differential side: | 25 |
| Coupling / mating type: | Constant-velocity joint |
| Internal gear connection on the differential side: | 28 |
| Length [mm]: | 32 |
| Outside diameter [mm]: | 108 |
| Coupling / mating type: | Constant-velocity joint |
| Drive shaft: | Without abs ring |
| Length [mm]: | 40 |
| Location on the axis: | Interior |
| Outside diameter [mm]: | 108 |
| Serrated connection box side: | 28 |
| Chamfer diameter 1 [mm]: | 94 |
| Coupling / mating type: | Hinge disc |
| Hole diameter [mm]: | 10.2 |
| Internal gear connection on the differential side: | 28 |
| Length [mm]: | 40 |
| Location: | Front axle |
| Location on the axis: | Interior |
| machined: | With groove in the inner part (inside) |
| Number of holes: | 6 |
| Number of mounting holes: | 6 |
| Outside diameter [mm]: | 108 |
| Chamfer diameter 1 [mm]: | 94 |
| Chamfer diameter 2 [mm]: | 94 |
| Coupling / mating type: | Hinge disc |
| Hinge diameter [mm]: | 108 |
| Hole diameter [mm]: | 10.2 |
| Internal gear connection on the differential side: | 28 |
| Length [mm]: | 40 |
| machined: | Without cutting / Withouttching in the inner part |
| Number of holes: | 6 |
| Chamfer diameter 1 [mm]: | 94 |
| Chamfer diameter 2 [mm]: | 94 |
| Coupling / mating type: | Hinge disc |
| Features of execution 8: | With rubber cuff |
| Hinge diameter [mm]: | 108 |
| Hole diameter [mm]: | 10.2 |
| Internal gear connection on the differential side: | 28 |
| Length [mm]: | 40 |
| machined: | Without cutting / Withouttching in the inner part |
| Number of holes: | 6 |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.