Internal gear connection on the wheel side: | 27 |
Length [mm]: | 99.5 |
Location on the axis: | Outer |
Number of Teeth, ABS Ring: | 48 |
Outer gearing wheel side: | 38 |
Spacer diameter [mm]: | 60 |
Specification: | GrooveType:Inner, Inner groove |
Wheel-side gear connection: | 38 |
Internal gear connection on the wheel side: | 36 |
Length [mm]: | 106.5 |
Location: | Front axle |
Location on the axis: | Outer |
Number of Teeth, ABS Ring: | 48 |
Outer gearing wheel side: | 38 |
Spacer diameter [mm]: | 60 |
Specification: | GrooveType:Inner, Inner groove |
Wheel-side gear connection: | 38 |
Internal gear connection on the wheel side: | 27 |
Length [mm]: | 99.5 |
Number of Teeth, ABS Ring: | 48 |
Outer gearing wheel side: | 38 |
Spacer diameter [mm]: | 60 |
Internal gear connection on the wheel side: | 36 |
Length [mm]: | 106.5 |
Number of Teeth, ABS Ring: | 48 |
Outer gearing wheel side: | 38 |
Spacer diameter [mm]: | 60 |
Hinge diameter [mm]: | 88 |
Internal gear connection on the differential side: | 34 |
Length [mm]: | 59.5 |
Location: | Front axle |
Location on the axis: | Interior |
Diameter 2 [mm]: | 88.5 |
Internal gear connection on the differential side: | 34 |
Length [mm]: | 85 |
Location: | Front axle |
Location on the axis: | Interior |
For article or original number: | Kfr543 |
Internal gear connection on the wheel side: | 36 |
Location: | Front axle |
Location on the axis: | Interior, Outer |
Number of Teeth, ABS Ring: | 48 |
Outer gearing wheel side: | 38 |
Outside diameter [mm]: | 100.5 |
Spacer diameter [mm]: | 60 |
Wheel-side gear connection: | 38 |
machined: | With groove in the inner part (inside) |
Length [mm]: | 82 |
Hinge diameter [mm]: | 88 |
Internal gear connection on the differential side: | 34 |
Length [mm]: | 82 |
Location: | Front axle |
Location on the axis: | Interior |
Internal gear connection on the wheel side: | 36 |
Location on the axis: | Interior |
Number of Teeth, ABS Ring: | 48 |
Outer gearing wheel side: | 38 |
Outside diameter [mm]: | 100.5 |
Spacer diameter [mm]: | 60 |
machined: | With groove in the inner part (inside) |
Internal gear connection on the wheel side: | 36 |
Location on the axis: | Outer |
Manufacturing material: | Rubber |
Number of Teeth, ABS Ring: | 48 |
Outer gearing wheel side: | 38 |
Outside diameter [mm]: | 100.5, 97.5 |
Spacer diameter [mm]: | 60 |
Wheel-side gear connection: | 38 |
machined: | With groove / notch in the inner part, Without cutting / Withouttching in the inner part |
Internal gear connection on the differential side: | 34 |
Length [mm]: | 33.2 |
Location: | Front axle, Rear axle |
Location on the axis: | Interior |
Internal gear connection on the differential side: | 28 |
Length [mm]: | 100 |
Location: | Front axle, Rear axle |
Location in the car: | Left |
Location on the axis: | Interior |
Outer gearing differential side: | 35 |
Spacer diameter [mm]: | 42 |
Toothed joint on the differential side: | 35 |
Length [mm]: | 59.5 |
Length [mm]: | 85 |
Coupling / mating type: | Hinge |
Drive shaft: | Without abs ring |
Hinge diameter [mm]: | 90 |
Internal gear connection on the differential side: | 34 |
Length [mm]: | 59.5 |
Location in the car: | Front axle, Gearbox side |
Spacer diameter [mm]: | 88 |
Hinge diameter [mm]: | 88.5 |
Internal gear connection on the differential side: | 34 |
Length [mm]: | 85 |
Internal gear connection on the differential side: | 28 |
Length [mm]: | 160 |
Location: | Front axle, Rear axle |
Location in the car: | Right |
Location on the axis: | Interior |
Outer gearing differential side: | 26 |
Spacer diameter [mm]: | 40 |
Toothed joint on the differential side: | 26 |
Coupling / mating type: | Hinge |
Diameter 1 [mm]: | 26.43 |
Features of execution 8: | With rubber cuff |
Hinge diameter [mm]: | 123.5, 86 |
Hole diameter [mm]: | 10.58 |
Internal gear connection on the differential side: | 34 |
Length [mm]: | 83.7 |
Number of holes: | 6 |
Tripoid roller diameter [mm]: | 43.21 |
machined: | Without cutting / Withouttching in the inner part |
Coupling / mating type: | Hinge |
Diameter 1 [mm]: | 26.43 |
Features of execution 8: | With rubber cuff |
Hinge diameter [mm]: | 123.5, 86 |
Hole diameter [mm]: | 10.58 |
Internal gear connection on the differential side: | 34 |
Length [mm]: | 83.7, 84 |
Number of holes: | 6 |
Tripoid roller diameter [mm]: | 43.21 |
machined: | Notches in the inner part, Without cutting / Withouttching in the inner part, Without slicing |
When looking for the CV Joint for your Volkswagen Sharan Mk1 (7M_) Van, keep these points in mind:
Discovering the ideal component can be achieved through various methods:
Deciding between original or alternative CV Joint for your Volkswagen Sharan Mk1 (7M_) Van involves weighing numerous factors and personal preferences. Consider these insights to guide your decision-making process:
Leading 5 brands in the "Constant-velocity joint" category for Volkswagen Sharan Mk1 (7M_) Van include:
Our selection spans a broad range within the “CV Joint” category, with affordability from 102 to 440 PLN.
Visit our web shop for a comprehensive suite of necessities for your vehicle, backed by expert guidance and, above all, a delightful customer experience. Choose wisely, and leave the rest to us. Together, let's ensure your vehicle is well-cared for!
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.