| Features of execution 8: | With bearing |
| Lever location: | Cross arm |
| Location: | Rear axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Manufacturing material: | Sheet steel |
| Material: | Sheet steel |
| Required amount: | 2 |
| Rudder type: | Cross arm |
| Weight, kg]: | 1.316 |
| Location: | Rear axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower, Outer |
| Weight, kg]: | 1.4 |
| Additional Information: | With bearing |
| Features of execution 8: | With bearing |
| Lever location: | Cross arm |
| Location: | Rear axle |
| Location on the axis: | Lower |
| Manufacturing material: | Sheet steel |
| Material: | Sheet steel |
| Rudder type: | Cross arm |
| Weight, kg]: | 1.274 |
| Location: | Front axle |
| Location in the car: | Left |
| Location on the axis: | Lower |
| Weight, kg]: | 4,4 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Weight, kg]: | 4,4 |
| Location: | Rear axle |
| Material: | Sheet steel |
| Features of execution 8: | With rubber bearing |
| Length [mm]: | 557 |
| Location: | Rear axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Manufacturing material: | Sheet steel |
| Material: | Sheet steel |
| Rack: | Connecting rod |
| Additional Information: | With rubber bearing |
| Length [mm]: | 557 |
| Lever location: | Cross arm |
| Required amount: | 2 |
| Additional Information: | Without bearing |
| Features of execution 8: | Without bearing |
| Lever location: | Cross arm |
| Location: | Front axle |
| Location in the car: | Left |
| Location on the axis: | Lower |
| Manufacturing material: | Table casting |
| Material: | Cast Steel, Steel |
| Rudder type: | Cross arm |
| Weight, kg]: | 3.976 |
| Lever location: | Cross arm |
| Location: | Front axle |
| Location in the car: | Right |
| Location on the axis: | Lower |
| Rudder type: | Cross arm |
| Lever location: | Cross arm |
| Location: | Front axle |
| Location in the car: | Left |
| Location on the axis: | Lower |
| Rudder type: | Cross arm |
| Additional Information: | Without fixing rack |
| Features of execution 8: | With independent suspension joint / swing arm, Without rubber bearing |
| Location: | Front axle |
| Location in the car: | Left |
| Location on the axis: | Lower |
| Manufacturing material: | Steel |
| Material: | Steel |
| Number of mounting holes: | 5 |
| Paired article numbers: | 72-0737 |
| Rudder type: | Cross arm |
| Internal thread [mm]: | M14x1,5 |
| Lever location: | Cross arm |
| Location: | Front axle |
| Location in the car: | Left |
| Location on the axis: | Lower |
| Outside thread [mm]: | M12x1.5 |
| Rudder type: | Cross arm |
| Thread size: | M12x1.5 |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.