Location: | Front axle |
Location in the car: | Left, Right |
Rack: | Connecting rod |
Weight, kg]: | 0.456 |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Specification: | without ball joint |
Weight, kg]: | 5,9 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Specification: | without ball joint |
Weight, kg]: | 5.825 |
Car with left- / right-hand drive: | for left-hand/right-hand drive vehicles |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturing material: | Steel |
Paired article numbers: | Ft15543 |
Rudder type: | Cross arm |
Section / Part: | Bottom part |
type of instalation: | Silentblock |
Car with left- / right-hand drive: | for left-hand/right-hand drive vehicles |
Location: | Front axle |
Location in the car: | Right |
Manufacturing material: | Steel |
Paired article numbers: | Ft15542 |
Rudder type: | Cross arm |
Section / Part: | Bottom part |
type of instalation: | Silentblock |
Cone size [mm]: | 17 |
Location in the car: | Front axle left, Lower |
Paired article numbers: | D120587 |
Weight, kg]: | 5.57 |
Cone size [mm]: | 17 |
Location in the car: | Front axle right, Lower |
Paired article numbers: | D120588 |
Weight, kg]: | 5.55 |
Cone size [mm]: | 17 |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Manufacturing material: | Sheet steel |
Paired article numbers: | 22861, 72-0905 |
Required amount: | 1 |
Rudder type: | Cross arm |
Weight, kg]: | 6.2001 |
Cone size [mm]: | 17 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Manufacturing material: | Sheet steel |
Paired article numbers: | 22862, 72-0909 |
Required amount: | 1 |
Rudder type: | Cross arm |
Weight, kg]: | 6,2 |
Height [mm]: | 75 |
Length [mm]: | 495 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Rudder type: | Cross arm |
Thread size: | Without ball joint |
Thread size 2: | Without Ball Joint |
Height [mm]: | 75 |
Length [mm]: | 495 |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Rudder type: | Cross arm |
Thread size: | Without ball joint |
Thread size 2: | Without Ball Joint |
Features of execution 8: | Without swing joint / swing arm |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Paired article numbers: | Qsa1978s |
Rudder type: | Cross arm |
Payload: | Not for increased load |
Cone size [mm]: | 16.3 |
Length [mm]: | 407 |
Rudder type: | Cross arm |
Weight, kg]: | 5, 6.04 |
Payload: | Not for increased load |
Additional Information: | Without accessories |
Car with left- / right-hand drive: | For left / right hand drive, for left-hand/right-hand drive vehicles |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Paired article numbers: | Jtc1334 |
Rudder type: | Cross arm |
type of instalation: | Rubber-metal support, Silentblock |
Cone size [mm]: | 17 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Manufacturing material: | Sheet steel |
Paired article numbers: | 22862 |
Required amount: | 1 |
Rudder type: | Cross arm |
Weight, kg]: | 6,2 |
Cone size [mm]: | 17 |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Manufacturing material: | Sheet steel |
Paired article numbers: | 22861 |
Required amount: | 1 |
Rudder type: | Cross arm |
Weight, kg]: | 6.2001 |
Additional Information: | Without accessories |
Car with left- / right-hand drive: | For left / right hand drive, for left-hand/right-hand drive vehicles |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Paired article numbers: | Jtc1333 |
Rudder type: | Cross arm |
type of instalation: | Rubber-metal support, Silentblock |
Features of execution 8: | With rubber bearing |
Handlebar design: | Triangular lever |
Location: | Front axle |
Location in the car: | Right |
Manufacturing material: | Sheet steel |
Paired article numbers: | 302 018 |
Payload: | Not for increased load |
Rudder type: | Cross arm |
Surface: | painted black |
When looking for the Subframe for your Ford Transit Mk6 (FA) Van, keep these points in mind:
Discovering the ideal component can be achieved through various methods:
Deciding between original or alternative Control arm for your Ford Transit Mk6 (FA) Van involves weighing numerous factors and personal preferences. Consider these insights to guide your decision-making process:
Leading 5 brands in the "Suspension arm" category for Ford Transit Mk6 (FA) Van include:
Our selection spans a broad range within the “Control arm” category, with affordability from 115 to 821 PLN.
Visit our web shop for a comprehensive suite of necessities for your vehicle, backed by expert guidance and, above all, a delightful customer experience. Choose wisely, and leave the rest to us. Together, let's ensure your vehicle is well-cared for!
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.