| Features of execution 8: | With independent suspension joint / swing arm |
| Location: | Front axle |
| Location in the car: | Right |
| Location on the axis: | Upper |
| Paired article numbers: | 72-1889 |
| Rudder type: | Cross arm |
| Location: | Rear axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Material: | Sheet steel |
| Lever location: | Cross arm |
| Location: | Rear axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Rack: | Thrust |
| Lever location: | Cross arm |
| Location: | Rear axle |
| Location on the axis: | Upper |
| Weight, kg]: | 1.667 |
| Height [mm]: | 18,5, 18.5 |
| Lever location: | Cross arm |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Rudder type: | Cross arm |
| Additional Information: | with independent suspension joint / swing arm |
| Cone size [mm]: | 13 |
| Features of execution 8: | With independent suspension joint / swing arm |
| Inner diameter [mm]: | 10 |
| Lever location: | Cross arm |
| Location: | Front axle |
| Location in the car: | Left |
| Manufacturing material: | Sheet steel |
| Material: | Sheet steel |
| Outside thread [mm]: | M12x1,25 |
| Overall height [mm]: | 77 |
| Rudder type: | Cross arm |
| Section / Part: | Top part |
| Thread size: | M12x1,25 |
| Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Manufacturing material: | Table casting |
| Material: | Steel |
| Rudder type: | Cross arm |
| Thread size: | M16x1,5 |
| Cone size [mm]: | 18.5 |
| Lever location: | Cross arm |
| Location: | Front axle, Rear axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Outside thread [mm]: | M16,1,5 |
| Rudder type: | Cross arm |
| Thread size: | M16,1,5 |
| Location: | Rear axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Material: | Steel |
| Weight, kg]: | 0.89 |
| Location: | Rear axle |
| Weight, kg]: | 1,579 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Rudder type: | Trailing arm |
| Features of execution 8: | With independent suspension joint / swing arm |
| Location: | Front axle |
| Location in the car: | Left |
| Location on the axis: | Upper |
| Paired article numbers: | 72-1890 |
| Rudder type: | Cross arm |
| Cone size [mm]: | 19.5 |
| Inner diameter [mm]: | 12 |
| Lever location: | Cross arm |
| Location: | Front axle |
| Location in the car: | Left |
| Location on the axis: | Lower |
| Outside thread [mm]: | M16x1,5 |
| Overall height [mm]: | 86 |
| Rudder type: | Cross arm |
| Section / Part: | Front part |
| Thread size: | M16x1,5 |
| Location: | Rear axle |
| Location in the car: | Left, Right |
| Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
| Location: | Front axle |
| Location in the car: | Right |
| Location on the axis: | Lower |
| Manufacturing material: | Table casting |
| Material: | Steel |
| Paired article numbers: | 35-16 050 0054, 72-2029 |
| Rudder type: | Cross arm |
| Location: | Front axle |
| Location in the car: | Left |
| Location on the axis: | Lower |
| Manufacturing material: | Steel |
| Material: | Steel |
| Paired article numbers: | 23732, 72-2028 |
| Required amount: | 1 |
| Rudder type: | Cross arm |
| Weight, kg]: | 4 |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Manufacturing material: | Steel |
| Material: | Steel |
| Rudder type: | Cross arm |
| Weight, kg]: | 2,2 |
| Additional Information: | With rubber bearing |
| Features of execution 8: | With rubber bearing |
| Lever location: | Cross arm |
| Rudder type: | Cross arm |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.