| Car with left- / right-hand drive: | for left-hand/right-hand drive vehicles |
| Dist. between the hole. 1 / Distance between holes 2: | 207 |
| Hole diameter [mm]: | 12.2 |
| Length [mm]: | 207 |
| Location: | Rear axle |
| Location in the car: | Left, Right |
| Location on the axis: | Front, Lower |
| Material: | Sheet steel |
| Features of execution 8: | With rubber bearing |
| Length [mm]: | 286 |
| Lever location: | Cross arm |
| Location: | Rear axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
| Manufacturing material: | Steel |
| Material: | Steel |
| Rack: | Guide bar |
| Features of execution 8: | With rubber bearing |
| Length [mm]: | 557 |
| Location: | Rear axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Manufacturing material: | Sheet steel |
| Material: | Sheet steel |
| Rack: | Connecting rod |
| Features of execution 8: | With rubber bearing, Without swing joint / swing arm |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Manufacturing material: | Sheet steel |
| Material: | Sheet steel |
| Rudder type: | Cross arm |
| Length [mm]: | 257 |
| Location: | Front axle, Rear axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Material: | Steel |
| Rack: | Connecting rod |
| Thread size: | M10x1,5 |
| Features of execution 8: | With rubber bearing |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Manufacturing material: | Sheet steel |
| Material: | Sheet steel |
| Rudder type: | Cross arm |
| Features of execution 8: | With rubber bearing |
| Length [mm]: | 306 |
| Location: | Rear axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
| Manufacturing material: | Sheet steel |
| Material: | Sheet steel |
| Rack: | Thrust |
| Location in the car: | Front, Lower, Rear axle left, Rear axle right |
| Material: | Sheet steel |
| Features of execution 8: | With rubber bearing |
| Length [mm]: | 413 |
| Location: | Front axle, Rear axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
| Manufacturing material: | Sheet steel |
| Material: | Sheet steel |
| Rack: | Connecting rod |
| Features of execution 8: | With rubber bearing |
| Length [mm]: | 166 |
| Location: | Rear axle |
| Location in the car: | Left, Right |
| Manufacturing material: | Sheet steel |
| Material: | Sheet steel |
| Rudder type: | Cross arm |
| Cone size [mm]: | 18 |
| Length [mm]: | 296.6 |
| Location: | Front axle |
| Location in the car: | Left |
| Location on the axis: | Lower |
| Material: | Sheet steel |
| Paired article numbers: | 716 050 0009 |
| Features of execution 8: | With rubber bearing |
| Location: | Front axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Manufacturing material: | Sheet steel |
| Material: | Sheet steel |
| Rudder type: | Cross arm |
| Features of execution 8: | With rubber bearing |
| Length [mm]: | 285 |
| Lever location: | Cross arm |
| Location: | Rear axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
| Manufacturing material: | Sheet steel |
| Material: | Sheet steel |
| Rack: | Guide bar |
| Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
| Location: | Front axle |
| Location in the car: | Left |
| Location on the axis: | Lower |
| Manufacturing material: | Sheet steel |
| Material: | Sheet steel |
| Paired article numbers: | 32-16 050 0086 |
| Rudder type: | Cross arm |
| Thread size: | M16x1,5 |
| Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
| Location: | Front axle |
| Location in the car: | Left |
| Location on the axis: | Lower |
| Manufacturing material: | Sheet steel |
| Material: | Sheet steel |
| Paired article numbers: | 16-16 050 0030 |
| Rudder type: | Cross arm |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.