| Location: | Rear axle |
| Location on the axis: | Lower |
| Packing height [cm]: | 7.5 |
| Packing length [cm]: | 32 |
| Packing width [cm]: | 8 |
| Required amount: | 2 |
| Weight, kg]: | 0,65 |
| Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
| Mounting points diameter [mm]: | 10 |
| Packing height [cm]: | 7 |
| Packing length [cm]: | 35 |
| Packing width [cm]: | 25 |
| Paired article numbers: | L25519 |
| Rudder type: | Cross arm |
| Weight, kg]: | 2,2 |
| Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
| Mounting points diameter [mm]: | 10 |
| Packing height [cm]: | 7 |
| Packing length [cm]: | 35 |
| Packing width [cm]: | 25 |
| Paired article numbers: | L25520 |
| Rudder type: | Cross arm |
| Weight, kg]: | 2,2 |
| Location: | Front axle |
| Location in the car: | Right |
| Location on the axis: | Lower |
| Packing height [cm]: | 11 |
| Packing length [cm]: | 50 |
| Packing width [cm]: | 13.5 |
| Paired article numbers: | L29528 |
| Required amount: | 1 |
| Rudder type: | Cross arm |
| Weight, kg]: | 2 |
| Packing height [cm]: | 11 |
| Packing length [cm]: | 50 |
| Packing width [cm]: | 13.5 |
| Paired article numbers: | L29527 |
| Required amount: | 1 |
| Rudder type: | Cross arm |
| Weight, kg]: | 2 |
| Lever location: | Cross arm |
| Location: | Rear axle |
| Location in the car: | Left, Right |
| Packing height [cm]: | 4 |
| Packing length [cm]: | 31 |
| Packing width [cm]: | 8 |
| Rack: | Oscillating semi-shafts |
| Weight, kg]: | 0.5 |
| Features of execution 8: | With rubber bearing |
| Lever location: | Cross arm |
| Location: | Rear axle |
| Location in the car: | Left, Right |
| Location on the axis: | Lower |
| Packing height [cm]: | 4 |
| Packing length [cm]: | 31 |
| Packing width [cm]: | 8 |
| Required amount: | 2 |
| Rudder type: | Diagonal lever |
| Weight, kg]: | 0.55 |
| Features of execution 8: | With rubber bearing, Without swing joint / swing arm |
| Packing height [cm]: | 7.5 |
| Packing length [cm]: | 32 |
| Packing width [cm]: | 8 |
| Required amount: | 2 |
| Rudder type: | Cross arm |
| Weight, kg]: | 1 |
| Length [mm]: | 223 |
| Location: | Rear axle |
| Location in the car: | Left, Right |
| Packing height [cm]: | 7.5 |
| Packing length [cm]: | 32 |
| Packing width [cm]: | 8 |
| Rack: | Guide bar |
| Required amount: | 2 |
| Weight, kg]: | 0.488 |
| Features of execution 8: | With rubber bearing |
| Packing height [cm]: | 7.5 |
| Packing length [cm]: | 32 |
| Packing width [cm]: | 8 |
| Rudder type: | Diagonal lever |
| Weight, kg]: | 1.56 |
| Location: | Front axle |
| Location on the axis: | Lower |
| Location: | Front axle |
| Location in the car: | Right |
| Location on the axis: | Upper |
| Manufacturing material: | Aluminum |
| Material: | Aluminum |
| Packing height [cm]: | 8 |
| Packing length [cm]: | 36 |
| Packing width [cm]: | 7 |
| Paired article numbers: | L29592 |
| Rudder type: | Cross arm |
| Weight, kg]: | 0.5 |
| Location: | Rear axle |
| Location in the car: | Left, Right |
| Location on the axis: | Upper |
| Packing height [cm]: | 7.5 |
| Packing length [cm]: | 32 |
| Packing width [cm]: | 8 |
| Required amount: | 2 |
| Rudder type: | Diagonal lever |
| Weight, kg]: | 0,8 |
| Location: | Rear axle |
| Location in the car: | Left |
| Location on the axis: | Lower |
| Packing height [cm]: | 8 |
| Packing length [cm]: | 21.5 |
| Packing width [cm]: | 8 |
| Required amount: | 2 |
| Rudder type: | Diagonal lever |
| Weight, kg]: | 0.745 |
| Location: | Front axle |
| Location in the car: | Left |
| Location on the axis: | Upper |
| Packing height [cm]: | 7.5 |
| Packing length [cm]: | 32 |
| Packing width [cm]: | 8 |
| Paired article numbers: | L29543 |
| Rudder type: | Cross arm |
| Weight, kg]: | 0.52 |
| Location: | Front axle |
| Location in the car: | Right |
| Location on the axis: | Upper |
| Packing height [cm]: | 7.5 |
| Packing length [cm]: | 32 |
| Packing width [cm]: | 8 |
| Paired article numbers: | L29544 |
| Rudder type: | Cross arm |
| Weight, kg]: | 0.52 |
| Features of execution 8: | With independent suspension joint / swing arm |
| Packing height [cm]: | 8 |
| Packing length [cm]: | 29 |
| Packing width [cm]: | 13 |
| Required amount: | 2 |
| Weight, kg]: | 1.4 |
| Location: | Rear axle |
| Location in the car: | Left, Right |
| Material: | Sheet steel |
| Packing height [cm]: | 4 |
| Packing length [cm]: | 61 |
| Packing width [cm]: | 6 |
| Required amount: | 2 |
| Weight, kg]: | 1.32 |
| Packing height [cm]: | 7 |
| Packing length [cm]: | 41 |
| Packing width [cm]: | 10 |
| Paired article numbers: | L29607 |
| Rudder type: | Cross arm |
| Weight, kg]: | 0.57 |
| Packing height [cm]: | 7 |
| Packing length [cm]: | 41 |
| Packing width [cm]: | 10 |
| Paired article numbers: | L29608 |
| Rudder type: | Cross arm |
| Weight, kg]: | 0.57 |
Welcome to the "Monroe Suspension arm" section on EXIST.AE! Here, you'll discover a wide selection of products and enticing offers!
Our online store showcases Monroe products for a wide range of vehicle models. Prices start from 55 PLN and can go up to 944 PLN. Our aim is to ensure that servicing your vehicle is not only of high quality but also cost-effective.
EXIST.AE ensures the convenience and reliability of delivering goods from the "Monroe Suspension arm" category. You can receive your order by FedEx air parcel.
On our site, for Monroe products, you will find detailed descriptions, high-quality photos, and reviews from real customers. This way, you get a better understanding of the product before making a decision. Furthermore, you can always share your opinion and leave a review, helping other users.
Our service, delivery conditions, and access to genuine reviews make the shopping process enjoyable and convenient!
Thank you for being with us and choosing EXIST.AE as your reliable partner in car care.
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.