Features of execution 8: | With rubber bearing |
Inner diameter [mm]: | 12 |
Length [mm]: | 223 |
Lever location: | Cross arm |
Location: | Front axle, Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturing material: | Sheet steel |
Rudder type: | Cross arm |
Features of execution 8: | With rubber bearing |
Length [mm]: | 331.8 |
Location: | Front axle, Rear axle |
Location in the car: | Left, Right |
Manufacturing material: | Sheet steel |
Mounting points diameter [mm]: | 12.2 |
Required amount: | 2 |
Rudder type: | Cross arm |
Length [mm]: | 267 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Rudder type: | Cross arm |
Features of execution 8: | With rubber bearing |
Length [mm]: | 223 |
Lever location: | Cross arm |
Location: | Front axle, Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturing material: | Sheet steel |
Mounting points diameter [mm]: | 12.2 |
Required amount: | 2 |
Rudder type: | Cross arm |
Length [mm]: | 169.9 |
Location: | Rear axle |
Location in the car: | Right |
Location on the axis: | Upper |
Mounting points diameter [mm]: | 10.2 |
Paired article numbers: | G5-652 |
Required amount: | 1 |
Rudder type: | Cross arm |
Length [mm]: | 169.9 |
Location: | Rear axle |
Location in the car: | Left |
Location on the axis: | Upper |
Mounting points diameter [mm]: | 10.2 |
Paired article numbers: | G5-659 |
Required amount: | 1 |
Rudder type: | Cross arm |
Length [mm]: | 211.5 |
Location: | Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Outside thread [mm]: | M10 x 1,50 rht m |
Rack: | Unloading strut |
Rudder type: | Cross arm |
Type of admission: | TÜV/GS tested |
Features of execution 8: | With rubber bearing |
Inner diameter [mm]: | 12.5 |
Length [mm]: | 225 |
Location: | Front axle, Rear axle |
Location in the car: | Left |
Location on the axis: | Upper |
Manufacturing material: | Sheet steel |
Paired article numbers: | G5-674 |
Rudder type: | Cross arm |
Features of execution 8: | With rubber bearing |
Inner diameter [mm]: | 12.5 |
Length [mm]: | 225 |
Location: | Front axle, Rear axle |
Location in the car: | Right |
Location on the axis: | Upper |
Manufacturing material: | Sheet steel |
Paired article numbers: | G5-675 |
Rudder type: | Cross arm |
Cone size [mm]: | 13 |
Hole diameter [mm]: | 10 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Rudder type: | Cross arm |
Features of execution 8: | With rubber bearing |
Hole diameter [mm]: | 7.1 |
Length [mm]: | 372 |
Location: | Rear axle |
Location in the car: | Right |
Location on the axis: | Upper |
Manufacturing material: | Sheet steel |
Mounting points diameter [mm]: | 12.2 |
Paired article numbers: | G5-960 |
Required amount: | 1 |
Rudder type: | Cross arm |
Cone size [mm]: | 15 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Rudder type: | Cross arm |
Features of execution 8: | With rubber bearing |
Hole diameter [mm]: | 7.1 |
Length [mm]: | 372 |
Location: | Rear axle |
Location in the car: | Left |
Location on the axis: | Upper |
Manufacturing material: | Sheet steel |
Mounting points diameter [mm]: | 12.2 |
Paired article numbers: | G5-961 |
Required amount: | 1 |
Rudder type: | Cross arm |
Alternative repair kit: | G5-831 |
Cone size [mm]: | 11.3 |
Features of execution 8: | With independent suspension joint / swing arm, With reinforcing material, With rubber bearing |
Length [mm]: | 257 |
Lever location: | Cross arm |
Location: | Front axle, Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturing material: | Table casting |
Mounting points diameter [mm]: | 12.2 |
Outside thread [mm]: | M10 x 1,50 rht m |
Required amount: | 2 |
Rudder type: | Cross arm |
type of instalation: | Rubber-metal support, Silentblock |
Length [mm]: | 448 |
Location in the car: | Behind, Left, Lower, Rear axle |
Mounting points diameter [mm]: | 12.2, 12.5 |
Paired article numbers: | G5-2063 |
Required amount: | 1 |
Length [mm]: | 362 |
Location in the car: | In the middle, Left, Rear axle, Upper |
Mounting points diameter [mm]: | 12.2 |
Paired article numbers: | G5-2005 |
Required amount: | 1 |
Location: | Front axle, Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Rudder type: | Cross arm |
Item numbers of recommended components: | CA-00004 |
Location: | Front axle, Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Required amount: | 2 |
Rudder type: | Cross arm |
Location: | Front axle, Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Rudder type: | Cross arm |
Features of execution 8: | With reinforcing material, With rubber bearing |
Inner diameter 1 [mm]: | 12.3 |
Inner diameter 2 [mm]: | 12.4 |
Length [mm]: | 349 |
Location: | Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturing material: | Sheet steel |
Rudder type: | Cross arm |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.