Lever location: | Trailing arm |
Location: | Front axle, Rear axle |
Location in the car: | Right |
Packing height [cm]: | 11 |
Packing length [cm]: | 48.5 |
Packing width [cm]: | 14 |
Paired article numbers: | VO-TC-10775 |
Rudder type: | Trailing arm |
Type of packaging: | Soft |
Weight, kg]: | 2.02 |
Cone size [mm]: | 19 |
Length [mm]: | 368 |
Rudder type: | Cross arm |
Weight, kg]: | 3,3, 3.34 |
Cone size [mm]: | 19 |
Length [mm]: | 395 |
Rudder type: | Cross arm |
Weight, kg]: | 3,1, 3.24 |
Features of execution 8: | With bolt |
Location: | Front axle |
Location in the car: | Left |
Manufacturing material: | Steel |
Paired article numbers: | Ft15535 |
Rudder type: | Cross arm |
Features of execution 8: | With bolt |
Location: | Front axle |
Location in the car: | Right |
Manufacturing material: | Steel |
Paired article numbers: | Ft15534 |
Rudder type: | Cross arm |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Weight, kg]: | 3.495131 |
Features of execution 8: | With bearing |
Location: | Front axle |
Location on the axis: | Lower |
Recommended special tool number: | V99-1020 |
Rudder type: | Cross arm |
Weight, kg]: | 2.45 |
Features of execution 8: | With bearing |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Recommended special tool number: | V99-1020 |
Rudder type: | Cross arm |
Weight, kg]: | 1.98 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Weight, kg]: | 3,495139 |
Car with left- / right-hand drive: | For left / right hand drive |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Rudder type: | Cross arm |
Additional Information: | With accessories |
Cone size [mm]: | 17 |
Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturing material: | Sheet steel |
Rudder type: | Cross arm |
Features of execution 8: | With bearing |
Location: | Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturing material: | Sheet steel |
Required amount: | 2 |
Rudder type: | Cross arm |
Weight, kg]: | 2.7 |
Cone size [mm]: | 14.9 |
Length [mm]: | 391 |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Rudder type: | Cross arm |
Weight, kg]: | 3.46, 3.52 |
Dist. between the hole. 1 / Distance between holes 2: | 276,4 |
Handlebar design: | Triangular lever |
Paired article numbers: | VKDS 321004 |
Location: | Rear axle |
Cone size [mm]: | 19 |
Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturing material: | Sheet steel |
Rudder type: | Cross arm |
Features of execution 8: | With rubber bearing |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturing material: | Sheet steel |
Rudder type: | Cross arm |
Location in the car: | Right |
Location in the car: | Left |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.