| Location in the car: | Behind, Left |
| Manufacturing material: | Epdm (ethylene propylene rubber), Polyamide |
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber), PA (polyamide) |
| Part type: | Cooling system branch pipe |
| Required amount: | 1 |
| Weight [g]: | 242 |
| Weight, kg]: | 0.242 |
| Location in the car: | Lower |
| Part type: | Cooling system branch pipe |
| Weight [g]: | 849, 940 |
| Cooling wiring: | From engine to engine radiator and add. water pump |
| Part type: | Cooling system branch pipe |
| Weight [g]: | 150 |
| Weight, kg]: | 0.15 |
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Location in the car: | Engine Block, In length |
| Material: | Polymer material |
| Location in the car: | Lower |
| Weight [g]: | 366 |
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Additional Information: | entrance |
| Cooling wiring: | From engine to radiator |
| Location in the car: | entrance |
| Part type: | Cooling system branch pipe |
| Weight [g]: | 49 |
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length [mm]: | 800 |
| Manufacturing material: | Epdm (ethylene propylene rubber), Polymer |
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber), Polymer material |
| Part type: | Cooling system branch pipe |
| Required amount: | 1 |
| Weight [g]: | 170 |
| Weight, kg]: | 0.17 |
| Material: | PA (polyamide) |
| Location in the car: | Engine Block |
| Location in the car: | Lower |
| Location in the car: | Radiator, Upper |
| Manufacturing material: | Rubber with fabric inclusion |
| Material: | Rubber with textile reinforcement |
| Part type: | Cooling system branch pipe |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.