Cooling wiring: | От корпуса регулятора охлаждающей жидкости к всасыв. разд. |
Location in the car: | Lower |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Part type: | Cooling system branch pipe |
Location in the car: | Crankcase |
Material: | GRP (Glass fibre Reinforced Plastic), Polyamid 6.6 |
Length [mm]: | 375 |
Manufacturing material: | Epdm (ethylene propylene rubber) |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Part type: | Cooling system branch pipe |
Required amount: | 1 |
Weight [g]: | 100 |
Cooling wiring: | From engine to engine radiator |
Location in the car: | Upper |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Part type: | Cooling system branch pipe |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Location in the car: | Upper |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Part type: | Cooling system branch pipe |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Inner diameter [mm]: | 40.5, 41.5 |
Location in the car: | Right lower, Right upper |
Part type: | Cooling system branch pipe |
Required amount: | 1 |
Weight [g]: | 235 |
Location in the car: | Engine Block, Side hitch |
Number of fixing holes: | 2 |
Number of wires: | 3 |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Part type: | Cooling system branch pipe |
Location in the car: | Right upper |
Additional Information: | Without layer pad |
Manufacturing material: | Polymer |
Material: | Polymer material |
Cooling wiring: | From distributor to cylinder head |
Part type: | Cooling system branch pipe |
Cooling wiring: | From the refrigeration controller housing to engine radiator |
Location in the car: | Lower |
Manufacturing material: | Rubber with fabric inclusion |
Material: | Rubber with textile reinforcement |
Part type: | Cooling system branch pipe |
Material: | NBR-PVC |
Location in the car: | Behind, Gearbox side |
Material: | Polymer material |
Weight [g]: | 60 |
not for article number: | 2175 |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.