Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Cooling wiring: | From engine to engine radiator |
Inner diameter: | 39 |
Inner diameter [mm]: | 39 |
Length [mm]: | 470 |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Outside diameter [mm]: | 42 |
Part type: | Cooling system branch pipe |
Cooling wiring: | From motor to thermostat |
Part type: | Cooling system branch pipe |
Weight [g]: | 0 |
not for article number: | 5541, 6319 |
Location in the car: | Upper |
Manufacturing material: | Polymer |
Material: | Polymer material |
Required amount: | 1 |
The form: | Arcuate |
Cooling wiring: | From engine to engine radiator |
Location in the car: | Lower |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Part type: | Cooling system branch pipe |
Manufacturing material: | Polymer |
Material: | Polymer material |
Required amount: | 1 |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Location in the car: | Engine Block |
Material: | GRP (Glass fibre Reinforced Plastic), Polyamid 6.6 |
Length [mm]: | 235 |
Manufacturing material: | Epdm (ethylene propylene rubber) |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber), EPDM (ethylene propylene diene rubber) |
Part type: | Cooling system branch pipe |
Required amount: | 1 |
Weight [g]: | 75 |
Location in the car: | Lower |
Manufacturing material: | Polymer |
Material: | Polymer material |
Required amount: | 1 |
Cooling wiring: | Radiator to Piping |
Location in the car: | Bottom left, Radiator |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length [mm]: | 204 |
Material: | FPM (Fluor-Kautschuk)/ACM (Polyacryl-Kautschuk), NBR (nitrile butadiene rubber), PA (polyamide) |
Part type: | Cooling system branch pipe |
Length [mm]: | 330 |
Location in the car: | Left, Top left |
Manufacturing material: | Epdm (ethylene propylene rubber) |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber), EPDM (ethylene propylene diene rubber) |
Part type: | Cooling system branch pipe |
Required amount: | 1 |
Weight [g]: | 240 |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length [mm]: | 350 |
Location in the car: | Right lower |
Manufacturing material: | Epdm (ethylene propylene rubber) |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Part type: | Cooling system branch pipe |
Required amount: | 1 |
Weight [g]: | 470 |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.