Height [mm]: | 67 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Location: | Front axle |
Location on the axis: | Upper |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Cone size [mm]: | 12.9, 14 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Thread size 1: | M10x1,25 |
Weight, kg]: | 0.42 |
Location: | Front axle |
Location in the car: | Left, Right |
Outer thread 2 [mm]: | M14x1,5 |
Outside diameter [mm]: | 43.05 |
Weight, kg]: | 0.46 |
Cone size [mm]: | 14.5 |
Location on the axis: | Lower |
Location: | Front axle |
Cone size [mm]: | 14.5 |
Diameter [mm]: | 40 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Recommended special tool number: | R10036 |
Thread size 1: | Mm12x1,5r |
Cone slope: | 1/8 |
Packing height [cm]: | 8.7 |
Packing length [cm]: | 9.3 |
Packing width [cm]: | 8.7 |
Thread size: | M10XP1.25 |
Weight [g]: | 216 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Build type: | Pressed |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mounting points diameter [mm]: | 17,9, 20 |
Thread size 1: | M14x2 |
Cone size [mm]: | 17.3 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter [mm]: | 43.1 |
Thread size 1: | Mm12x1.5r |
Cone size [mm]: | 12.9 |
Cone slope: | 1/10 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower, Upper |
Weight, kg]: | 0.36 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Required amount: | 2 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower, Upper |
Packing height [cm]: | 4.7 |
Packing length [cm]: | 16.5 |
Packing width [cm]: | 6.6 |
Weight, kg]: | 0.439 |
Cone size [mm]: | 14.5 |
Cone slope: | 1/10 |
Diameter [mm]: | 40 |
Features of execution 8: | Special mounting hardware required, With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | Circlip |
Outside diameter [mm]: | 40 |
Recommended special tool number: | R10036 |
Thread size 1: | Mm12x1,5r, Mm12x1.5r |
Build type: | Pressed |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mounting points diameter [mm]: | 17,9, 20 |
Thread size 1: | M14x2 |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.