Diameter [mm]: | 54 |
Location: | Front axle |
Location on the axis: | Upper |
Thread size 2: | M14x1.5 |
Weight, kg]: | 0.609183 |
Cone size [mm]: | 18.3 |
Diameter [mm]: | 41,6 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Thread size: | 5/8''X18 |
Weight, kg]: | 0.56, 0.6 |
Diameter [mm]: | 41 |
Location: | Front axle |
Location on the axis: | Lower |
Thread size 2: | 5/8x18h |
Weight, kg]: | 0.520128 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Weight, kg]: | 0.644125 |
Cone size [mm]: | 15.8 |
Diameter [mm]: | 45,5 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Thread size: | 9/16''X18 |
Weight, kg]: | 0.64, 0.66 |
Cone size [mm]: | 15.8 |
Cone slope: | 1/6 |
Diameter [mm]: | 45,5 |
Features of execution 8: | Special mounting hardware required |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Outside diameter [mm]: | 45.5 |
Recommended special tool number: | R10067 |
Thread size 1: | 9/16''x18, Mm14x1,5r |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Cone size [mm]: | 18.3 |
Cone slope: | 1/8 |
Diameter [mm]: | 41,5 |
Features of execution 8: | Special mounting hardware required, With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | Circlip |
Outside diameter [mm]: | 41.5 |
Recommended special tool number: | R10111 |
Thread size 1: | 5/8''x18 |
Amount required 2: | 7 |
Location: | Rear axle |
Packing height [cm]: | 6 |
Packing length [cm]: | 12.5 |
Packing width [cm]: | 10.5 |
Weight, kg]: | 1.03, 1.065 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Weight, kg]: | 0.64 |
Equipment option: | Plus kit |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower, Upper |
Manufacturer restriction 2: | Circlip |
Length [mm]: | 86, 91 |
Location: | Front axle |
Location on the axis: | Lower, Upper |
Outside thread [mm]: | M14 x 1,5, M16 x 1,5 |
Required amount: | 2 |
Spanner jaw width: | 22, 28 |
Weight, kg]: | 1.06 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower, Upper |
Required amount: | 2 |
Weight, kg]: | 1.044 |
Length [mm]: | 86, 91 |
Location: | Front axle |
Location on the axis: | Lower, Upper |
Outside thread [mm]: | M14 x 1,5, M16 x 1,5 |
Required amount: | 2 |
Spanner jaw width: | 22, 28 |
Thread size: | M14x1,5, M16x1,5 |
Weight, kg]: | 1.06 |
Location in the car: | Left, Right |
Packing height [cm]: | 8.6 |
Packing length [cm]: | 9.5 |
Packing width [cm]: | 9,4 |
Weight, kg]: | 0,65 |
Cone size [mm]: | 15.8 |
Location: | Front axle |
Location on the axis: | Upper |
Thread size 1: | Mm14x1,5r |
Build type: | Pressed |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Mounting points diameter [mm]: | 18.2, 21, 41,65 |
Thread size 1: | 5/8"-18 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Required amount: | 2 |
Required amount: | 2 |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.