Cone size [mm]: | 13.5 |
Location: | Front axle |
Location: | Front axle |
Height [mm]: | 92 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Thread size: | M14x1.5 |
Internal thread 1 (mm): | M14x1.5 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Cone size [mm]: | 18 |
Location: | Front axle |
Cone size [mm]: | 13.4 |
Features of execution 8: | With nut, With protective ring |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Nut-bolt construction: | Self-locking |
Outside diameter 1 [mm]: | 33.7 |
Outside diameter 2 [mm]: | 41.5 |
Outside thread [mm]: | M10 x 1,25 rht m |
Rudder type: | For wishbone |
Cone size [mm]: | 14.9, 15 |
Cone slope: | 1/8 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Thread size: | M12x1,5 |
Car with left- / right-hand drive: | For left / right hand drive, for left-hand/right-hand drive vehicles |
Cone slope: | 1:8 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Thread size: | M10*1.25 |
Cone size [mm]: | 18.1 |
Features of execution 8: | Without reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mounting points diameter [mm]: | 12.2 |
Number of fixing holes: | 2 |
Outside thread [mm]: | M14 x 1,50 rht m |
Required amount: | 2 |
Rudder type: | For wishbone |
Cone size [mm]: | 13.5 |
Features of execution 8: | With castellated nut, With protective ring |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Outside diameter 1 [mm]: | 33.7 |
Outside diameter 2 [mm]: | 41.5 |
Outside thread [mm]: | M10 x 1,25 rht m |
Required amount: | 2 |
Rudder type: | For wishbone |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Cone size [mm]: | 18.1 |
Features of execution 8: | Without reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mounting points diameter [mm]: | 12.2 |
Number of fixing holes: | 2 |
Outside thread [mm]: | M14 x 1,50 rht m |
Required amount: | 2 |
Rudder type: | For wishbone |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outer thread 2 [mm]: | M12x1,25 |
Weight, kg]: | 0.579 |
Features of execution 8: | With reinforcing material |
Height [mm]: | 85 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Cone size [mm]: | 13.4 |
Cone slope: | 1/8 |
Length [mm]: | 75 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Thread size 1: | M10x1,25 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Location in the car: | Left, Right |
Packing height [cm]: | 8.6 |
Packing length [cm]: | 9.5 |
Packing width [cm]: | 9,4 |
Weight, kg]: | 0.54 |
Height [mm]: | 50 |
Length [mm]: | 115 |
Location: | Front axle |
Thread size 1: | M12 x 1,25 |
Weight, kg]: | 0.483 |
Height [mm]: | 45 |
Length [mm]: | 75 |
Location: | Front axle |
Location on the axis: | Upper |
Thread size 1: | M10 x 1,25 |
Weight, kg]: | 0.205 |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.