Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Amount required 2: | 4 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Packing height [cm]: | 5.4 |
Packing length [cm]: | 8.5 |
Packing width [cm]: | 5.4 |
Weight, kg]: | 0.23, 0.245 |
Cone slope: | 1/8 |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Weight, kg]: | 0.19 |
Location: | Front axle |
Location in the car: | Left, Right |
Thread size 1: | M12x1,25 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Build type: | Pressed |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Mounting points diameter [mm]: | 13.3, 15, 33,7 |
Thread size 1: | M10x1.25 |
Cone size [mm]: | 13.4 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Thread size: | M10x1,25 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mounting diameter [mm]: | 18 |
Outside thread [mm]: | 14x1,5 |
Overall height [mm]: | 90 |
Packing height [cm]: | 15.4 |
Packing length [cm]: | 12.1 |
Packing width [cm]: | 3.7 |
Weight, kg]: | 0.7 |
Cone size [mm]: | 13.4 |
Cone slope: | 1/8 |
Diameter [mm]: | 33,7 |
Features of execution 8: | Special mounting hardware required, With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower, Upper |
Manufacturer restriction 2: | Circlip |
Outside diameter [mm]: | 33.7 |
Recommended special tool number: | R10078 |
Thread size 1: | Mm10x1,25r, Mm10x1.25r |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Colour: | Silver |
Diameter [mm]: | 14.4 |
Distance between fixing holes [mm]: | 80 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside thread [mm]: | M14x1,5 |
Overall height [mm]: | 94.4 |
Required amount: | 2 |
Spanner jaw width: | 22 |
Weight, kg]: | 0.66 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Height [mm]: | 92 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Thread size: | M14x1.5 |
Cone size [mm]: | 18.1 |
Features of execution 8: | Without reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mounting points diameter [mm]: | 12.2 |
Number of fixing holes: | 2 |
Outside thread [mm]: | M14 x 1,50 rht m |
Required amount: | 2 |
Rudder type: | For wishbone |
Cone size [mm]: | 13.4 |
Features of execution 8: | With nut, With protective ring |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Nut-bolt construction: | Self-locking |
Outside diameter 1 [mm]: | 33,7, 33.7 |
Outside diameter 2 [mm]: | 41,5, 41.5 |
Outside thread [mm]: | M10 x 1,25 rht m |
Rudder type: | For wishbone |
Cone size [mm]: | 13.4 |
Features of execution 8: | With nut, With protective ring |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Nut-bolt construction: | Self-locking |
Outside diameter 1 [mm]: | 33.7 |
Outside diameter 2 [mm]: | 41.5 |
Outside thread [mm]: | M10 x 1,25 rht m |
Rudder type: | For wishbone |
Car with left- / right-hand drive: | For left / right hand drive, for left-hand/right-hand drive vehicles |
Cone slope: | 1:8 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Thread size: | M10*1.25 |
Cone size [mm]: | 13.5 |
Features of execution 8: | With castellated nut, With protective ring |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Outside diameter 1 [mm]: | 33.7 |
Outside diameter 2 [mm]: | 41.5 |
Outside thread [mm]: | M10 x 1,25 rht m |
Required amount: | 2 |
Rudder type: | For wishbone |
Internal thread 1 (mm): | M14x1.5 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Cone size [mm]: | 18.1 |
Features of execution 8: | Without reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mounting points diameter [mm]: | 12.2 |
Number of fixing holes: | 2 |
Outside thread [mm]: | M14 x 1,50 rht m |
Required amount: | 2 |
Rudder type: | For wishbone |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.