Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outer thread 2 [mm]: | M16x2 |
Outside diameter 1 [mm]: | 45,5, 45.5 |
Weight, kg]: | 0.765, 0.794 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Diameter [mm]: | 45,5, 45.5 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Mounting diameter [mm]: | 16 |
Outside thread [mm]: | 14 x 1,5 |
Overall height [mm]: | 101 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Cone size [mm]: | 22, 32 |
Diameter [mm]: | 22.2 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Thread size: | M14x1,5 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Location in the car: | Rear axle |
Mounting diameter [mm]: | 23,3, 23.3 |
Outer thread 1 [mm]: | 20 x 1,5 |
Overall height [mm]: | 99.3 |
Technical information: | Ball joint rear susp |
Cone size [mm]: | 16 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Outer thread 2 [mm]: | M 14x1,5 |
Weight [g]: | 660 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Outside diameter [mm]: | 44.5 |
Thread size: | M14x1,5 |
Cone size [mm]: | 18.4 |
Cone slope: | 1/6 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower, Upper |
Thread size 1: | Mm14x1,5r, Mm14x1.5r |
Paired article numbers: | VKDS 417500 |
Thread size 1: | M20 x 1,5 |
Cone size [mm]: | 16 |
Cone slope: | 1/6 |
Diameter [mm]: | 45,6 |
Features of execution 8: | Special mounting hardware required |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Outside diameter [mm]: | 45.6 |
Recommended special tool number: | R10067 |
Thread size 1: | Mm14x1,5r |
Cone size [mm]: | 13.6 |
Cone slope: | 1/6 |
Diameter [mm]: | 42,3 |
Features of execution 8: | Special mounting hardware required, With reinforcing material |
Location: | Front axle |
Location on the axis: | Upper |
Manufacturer restriction 2: | Circlip |
Outside diameter [mm]: | 42.3 |
Recommended special tool number: | R10082 |
Thread size 1: | MM12X1,75R, Mm12x1.75r |
Packing height [cm]: | 6 |
Packing length [cm]: | 11 |
Packing width [cm]: | 6 |
Required amount: | 2 |
Weight, kg]: | 0.42 |
Height [mm]: | 125 |
Length [mm]: | 59 |
Thread size: | M16x2 |
Cone size [mm]: | 19 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter 1 [mm]: | 44 |
Outside diameter 2 [mm]: | 61 |
Outside thread [mm]: | M16 x 1,5 |
Required amount: | 2 |
Spanner jaw width: | 24 |
Thread size: | M16x1,5 |
Weight, kg]: | 0,65 |
Inner diameter [mm]: | 13, 13.2 |
Length [mm]: | 61.7, 62 |
Location: | Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Lower, Upper |
Outside diameter [mm]: | 47, 47.3 |
Cone size [mm]: | 16 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Outside diameter [mm]: | 46 |
Outside thread [mm]: | M14 x 1,5 |
Required amount: | 2 |
Thread size: | M14x1,5 |
Weight, kg]: | 0.665 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.