Cone size [mm]: | 18.6 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter 1 [mm]: | 44 |
Outside diameter 2 [mm]: | 40 |
Outside diameter [mm]: | 59.2 |
Outside thread [mm]: | M14 x 1,50 rht m |
Required amount: | 2 |
Rudder type: | For wishbone |
Cone size [mm]: | 21.35 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Outside thread [mm]: | M18 x 1,50 rht m |
Cone size [mm]: | 16 |
Features of execution 8: | With reinforcing material |
Flange hole diameter [mm]: | 10.5 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Number of fixing holes: | 3 |
Required amount: | 2 |
Cone size [mm]: | 14.18 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mount type: | Hanging |
Outer thread 1 [mm]: | M12 x 1,25 rht m |
Outer thread 2 [mm]: | M38 x 1,50 rht m |
Outside diameter 1 [mm]: | 52 |
Outside diameter 2 [mm]: | 47 |
Required amount: | 2 |
Rudder type: | For wishbone |
Cone size [mm]: | 18 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter [mm]: | 46.3 |
Cone size [mm]: | 14.8 |
Cone slope: | 1/6 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter [mm]: | 38 |
Cone size [mm]: | 14.5 |
Cone slope: | 1/10 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower, Upper |
Outside thread [mm]: | M14 x 1,50 rht m |
Cone size [mm]: | 17.84 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mounting points diameter [mm]: | 12.8 |
Number of fixing holes: | 3 |
Outside thread [mm]: | M16 x 1,50 rht m |
Required amount: | 2 |
Cone size [mm]: | 15 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Outside thread [mm]: | M12 x 1,50 rht m |
Cone size [mm]: | 15 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter [mm]: | 39 |
Outside thread [mm]: | M14 x 1,50 rht m |
Cone size [mm]: | 19.6 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside thread [mm]: | M18 x 1,50 rht m |
Cone size [mm]: | 16 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside thread [mm]: | M14 x 1,50 rht m |
Cone size [mm]: | 13.2 |
Cone slope: | 1/8 |
Diameter 1 [mm]: | 13 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Cone size [mm]: | 19.8 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Cone size [mm]: | 15.5 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Bolt diameter [mm]: | 20 |
Features of execution 8: | With protective ring |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter 1 [mm]: | 50 |
Outside diameter 2 [mm]: | 42.7 |
Required amount: | 2 |
Rudder type: | For wishbone |
Cone size [mm]: | 14.6 |
Cone slope: | 1/10 |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Cone size [mm]: | 18 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Outside diameter [mm]: | 45.5 |
Outside thread [mm]: | M16 x 1,50 |
Cone size [mm]: | 15 |
Length [mm]: | 160 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Outside thread [mm]: | M12 x 1,75 rht m |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.