Cone size [mm]: | 20.5 |
Location: | Front axle |
Location on the axis: | Lower |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Thread size: | M16x1.5 |
Weight, kg]: | 0.638 |
Cone size [mm]: | 20.3 |
Location: | Front axle |
Additional Information: | With accessories |
Cone size [mm]: | 20.3 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Thread size: | M16x1,5 |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Location in the car: | Front axle, both sides, Lower |
Weight, kg]: | 0.53 |
Location: | Front axle |
Quality: | Oe |
Diameter [mm]: | 13 |
Location: | Front axle |
Location on the axis: | Lower |
Thread size 2: | M16x1.5 |
Weight, kg]: | 0,671028 |
Location on the axis: | Lower |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Flange hole diameter [mm]: | 12 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Dist. between the hole. 1 / Distance between holes 2: | 80 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Number per axle: | 2 |
unit of measurement: | Set |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Cone size [mm]: | 20.3 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Thread size 1: | MM16X1,5R |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Required amount: | 2 |
Flange hole diameter [mm]: | 10 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Cone slope: | 1:10 |
Dist. between the hole. 1 / Distance between holes 2: | 80 |
Features of execution 8: | With reinforcing material |
Inner diameter [mm]: | 11 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer's approval: | Hps standard |
Number of fixing holes: | 2 |
Outside thread [mm]: | M16x1,5 |
Quality: | HPS standard |
Required amount: | 2 |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.