Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Location: | Front axle |
Location in the car: | Left, Right |
Build type: | Pressed |
Diameter [mm]: | 47,1 |
Hole diameter [mm]: | 12.1 |
Required amount: | 2 |
Height [mm]: | 85 |
Length [mm]: | 85 |
Location: | Rear axle |
Cone size [mm]: | 14.8 |
Cone slope: | 1/6 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | 2 x m12 |
Thread size 1: | Mm14x1,5r, Mm14x1.5r |
Amount required 2: | 7 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Packing height [cm]: | 4.9 |
Packing length [cm]: | 9.8 |
Packing width [cm]: | 9.6 |
Weight, kg]: | 0.478, 0.519 |
Inner diameter [mm]: | 12 |
Length [mm]: | 51.9, 52 |
Location: | Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Number per axle: | 2 |
Outside diameter [mm]: | 47, 47.05 |
Build type: | Pressed |
Diameter [mm]: | 47,1 |
Hole diameter [mm]: | 12.1 |
Required amount: | 2 |
Cone slope: | 1/6 |
Location in the car: | Left, Right |
Thread size 1: | Mm14x1.5r |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Cone slope: | 1/6 |
Location in the car: | Left, Right |
Thread size 1: | Mm14x1.5r |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.