Alternative repair kit: | 111 005 |
Handlebar design: | Single lever |
Location: | Front axle, Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturing material: | Sheet steel |
Number per axle: | 2 |
Rudder type: | Cross arm |
Surface: | painted black |
Height [mm]: | 44,7 |
Inner diameter 1 [mm]: | 12,22 |
Inner diameter 2 [mm]: | 14.2 |
Length [mm]: | 305 |
Location: | Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Weight, kg]: | 1.35 |
Location in the car: | Lower, Rear axle left |
Paired article numbers: | BAP55041 |
Weight, kg]: | 1.02 |
Location in the car: | Left and right, Rear axle, Upper |
Height [mm]: | 60 |
Length [mm]: | 298 |
Lever location: | Trailing arm |
Location: | Rear axle |
Location in the car: | Left |
Location on the axis: | Lower |
Max. length [mm]: | 366 |
Paired article numbers: | SE-108 |
Weight, kg]: | 1.011 |
Features of execution 8: | With bearing, With independent suspension joint / swing arm |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturing material: | Aluminum |
Paired article numbers: | CCA1145 |
Cone size [mm]: | 15.4 |
Cone slope: | 1/5 |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Paired article numbers: | 37058 |
Rack: | Connecting rod |
Rudder type: | Cross arm |
Undercarriage material: | Aluminum |
Location: | Rear axle |
Location on the axis: | Upper |
Rudder type: | Cross arm |
Lever location: | Cross arm |
Location: | Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Rudder type: | Cross arm |
Lever location: | Cross arm |
Location: | Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Rudder type: | Cross arm |
Length [mm]: | 297.8 |
Location in the car: | Left and right, Rear axle |
Mounting points diameter [mm]: | 12.2, 14.3 |
Required amount: | 2 |
Paired article numbers: | LVSA1772 |
Rudder type: | Cross arm |
Additional Information: | With bracket |
Build type: | Pre-assembly |
Cone size [mm]: | 15.4 |
Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Manufacturing material: | Aluminum |
Mounting points diameter [mm]: | 12.2 |
Outside thread [mm]: | M12 x 1,50 rht m |
Required amount: | 1 |
Rudder type: | Cross arm |
unit of measurement: | Set |
Location in the car: | Rear axle left |
Location in the car: | Front axle, Lower, Right |
Mounting points diameter [mm]: | 12.2, 13.2 |
Paired article numbers: | G6-2034S |
Required amount: | 1 |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.