Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Paired article numbers: | CCA1150 |
Additional Information: | With rubber bearing, with independent suspension joint / swing arm |
Cone size [mm]: | 16.45 |
Length [mm]: | 324 |
Lever location: | Cross arm |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Required amount: | 1 |
Thread size: | M14x1,50RHTM |
Diameter [inch]: | 324 |
Diameter [mm]: | 324 |
Lever location: | Cross arm |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Outside thread [mm]: | M14x1,5 |
Parameter: | High line |
Rudder type: | Cross arm |
Section / Part: | Front part |
Thread size: | M14x1,5 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Manufacturing material: | Steel |
Number per axle: | 1 |
Paired article numbers: | 27021-PCS-MS |
Rack: | Push bar |
Handlebar design: | Single lever |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Manufacturing material: | Aluminum |
Paired article numbers: | 500 116 |
Rudder type: | Cross arm |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Production number: | 4212520 |
Rudder type: | Cross arm |
Location in the car: | Lower Front Axle, Right |
Features of execution 8: | With rubber bearing |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Manufacturing material: | Steel |
Rack: | Push bar |
component number: | BSG 15-315-072 |
Location in the car: | Right |
Location on the axis: | Lower |
Location in the car: | Left |
Location on the axis: | Lower |
Location in the car: | Rear axle |
Cone size [mm]: | 16.5 |
Cone slope: | 1/10 |
Length [mm]: | 323 |
Location in the car: | Front, Front axle, Left, Lower |
Cone size [mm]: | 16.4 |
Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
Location: | Front axle |
Location in the car: | Left |
Manufacturing material: | Table casting |
Rudder type: | Cross arm |
Cone size [mm]: | 16.6 |
Features of execution 8: | Without rubber bearing |
Length [mm]: | 385 |
Location: | Front axle |
Location in the car: | Left |
Rack: | Push bar |
Rudder type: | Cross arm |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Upper |
Rudder type: | Cross arm |
Height [mm]: | 88 |
Length [mm]: | 378 |
Location in the car: | Front, Front axle left, Lower |
Paired article numbers: | TC-B-520 |
Thread size 1: | M14 x 1,5 |
Weight, kg]: | 1.111 |
Height [mm]: | 65 |
Length [mm]: | 460 |
Location in the car: | Behind, Front axle right, Upper |
Paired article numbers: | TC-B-523 |
Thread size 1: | M14 x 1,5 |
Weight, kg]: | 2.686 |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.