Lever location: | Cross arm |
Location: | Front axle, Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturing material: | Sheet steel |
Rudder type: | Cross arm |
Lever location: | Cross arm |
Location: | Front axle, Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Rudder type: | Cross arm |
Diameter [mm]: | 15 |
Paired article numbers: | FCA6986 |
Rudder type: | Cross arm |
Location: | Rear axle |
Location on the axis: | Upper |
Rack: | Guide bar |
Weight, kg]: | 1.484 |
Features of execution 8: | With rubber bearing |
Length [mm]: | 280 |
Lever location: | Cross arm |
Location: | Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturing material: | Sheet steel |
Rack: | Guide bar |
Cone size [mm]: | 18 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Number per axle: | 1 |
Paired article numbers: | 33706-PCS-MS |
Rudder type: | Cross arm |
Features of execution 8: | With independent suspension joint / swing arm |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Paired article numbers: | V50-9503 |
Recommended special tool number: | V99-1020 |
Rudder type: | Cross arm |
Weight, kg]: | 5.025 |
type of instalation: | Rubber foot |
Additional Information: | With sleeve |
Cone size [mm]: | 18 |
Features of execution 8: | With independent suspension joint / swing arm |
Location: | Front axle |
Location in the car: | Left |
Quality: | Wp |
Rudder type: | Cross arm |
Paired article numbers: | FCA7374 |
Rudder type: | Cross arm |
Location: | Rear axle |
Location in the car: | Left, Right |
Recommended special tool number: | V99-1020 |
Rudder type: | Diagonal lever |
Weight, kg]: | 1.161 |
Height [cm]: | 118 |
Height [mm]: | 118 |
Length [cm]: | 463 |
Length [mm]: | 463 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Rudder type: | For wishbone |
Serial number: | Cs-355l |
Weight, kg]: | 5.08 |
Width [cm]: | 383 |
Manufacturing material: | Sheet steel |
Rudder type: | Cross arm |
Location in the car: | Rear axle double-ended, Upper |
Location in the car: | Rear axle |
Cone size [mm]: | 18 |
Location in the car: | Front axle left, Lower |
Paired article numbers: | DSS1053 |
Thread size 1: | M14x1.5 |
Location in the car: | Rear axle |
Location in the car: | Left |
Location on the axis: | Lower |
Cone size [mm]: | 18 |
Features of execution 8: | With independent suspension joint / swing arm |
Location: | Front axle |
Location in the car: | Right |
Rudder type: | Cross arm |
Rudder type: | Cross arm |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.