Lever location: | Cross arm |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Packing height [cm]: | 8 |
Packing length [cm]: | 41.5 |
Packing width [cm]: | 11 |
Paired article numbers: | FD-TC-3377 |
Rudder type: | Cross arm |
Type of packaging: | Soft |
Weight, kg]: | 2.123 |
Hole diameter [mm]: | 16 |
Length [mm]: | 307.5 |
Location in the car: | Front axle, Right |
Paired article numbers: | 94-00425 |
Thread size 1: | 17 |
Weight, kg]: | 2.13 |
Location in the car: | Front axle, Lower, Right |
Location in the car: | Front axle, Left, Lower |
Height [mm]: | 66 |
Length [mm]: | 355 |
Location in the car: | Front axle right, Lower |
Paired article numbers: | TC-FO-412 |
Thread size 1: | M12 x 1,5 |
Weight, kg]: | 1.955 |
Cone size [mm]: | 14 |
Length [mm]: | 309 |
Rudder type: | Trailing arm |
Weight, kg]: | 1.9, 2.08 |
Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
Packing height [cm]: | 7 |
Packing length [cm]: | 41 |
Packing width [cm]: | 10 |
Paired article numbers: | L16506 |
Rudder type: | Cross arm |
Weight, kg]: | 2.15 |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Rudder type: | Cross arm |
Cone size [mm]: | 14.2 |
Length [mm]: | 307 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Rudder type: | Cross arm |
Rudder type: | Cross arm |
Colour: | Black |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Manufacturing material: | Table casting |
Paired article numbers: | V25-9593 |
Recommended special tool number: | V99-1020 |
Rudder type: | Cross arm |
Weight, kg]: | 2.035, 2.276 |
Length [mm]: | 579 |
Lever location: | Trailing arm |
Location: | Rear axle |
Pipe diameter [mm]: | 50 |
Rudder type: | Trailing arm |
Car with left- / right-hand drive: | For left / right hand drive |
Paired article numbers: | Jtc284 |
Lever location: | Cross arm |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Manufacturing material: | Cast iron |
Required amount: | 1 |
Rudder type: | Cross arm |
Cone size [mm]: | 14 |
Cone slope: | 1/6 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Rudder type: | Trailing arm |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.