Location in the car: | Rear axle left |
Paired article numbers: | 31.TC.665 |
Weight [g]: | 1230 |
Length [mm]: | 377 |
Location in the car: | Front axle, Left |
Paired article numbers: | SSW1228.01 |
Features of execution 8: | With rubber bearing, Without swing joint / swing arm |
Location: | Front axle |
Location in the car: | Right |
Manufacturing material: | Sheet steel |
Mounting points diameter [mm]: | 10.3 |
Number of fixing holes: | 3 |
Paired article numbers: | Fl10306-g |
Required amount: | 1 |
Rudder type: | Cross arm |
Additional Information: | With sleeve |
Cone size [mm]: | 15.4 |
Cone slope: | 1:5 |
Features of execution 8: | With independent suspension joint / swing arm |
Height [mm]: | 62 |
Inner diameter [mm]: | 12.2 |
Length [mm]: | 331 |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Manufacturing material: | Sheet steel |
Paired article numbers: | CCA1249 |
Thread size: | M12x1,5 |
Weight, kg]: | 3.46 |
Location: | Rear axle |
Recommended special tool number: | V99-1020 |
Rudder type: | Trailing arm |
Weight, kg]: | 1.3 |
Height [mm]: | 50 |
Length [mm]: | 355 |
Location in the car: | Rear axle, Upper |
Weight, kg]: | 1.298 |
Hole diameter 1 [mm]: | 12.2 |
Hole diameter 2 [mm]: | 14.2 |
Length [mm]: | 305.5 |
Location in the car: | Left and right, Rear axle |
Weight, kg]: | 1.37 |
Location in the car: | Rear axle double-ended |
Weight, kg]: | 1.37 |
Location in the car: | Front axle left |
Height [mm]: | 151 |
Length [mm]: | 305 |
Lever location: | Trailing arm |
Location: | Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Max. length [mm]: | 352 |
Weight, kg]: | 1.298 |
Features of execution 8: | Without swing joint / swing arm |
Paired article numbers: | Qsa2729s |
Rudder type: | Cross arm |
Location: | Front axle |
Location in the car: | Right |
Rudder type: | Cross arm |
Lever location: | Cross arm |
Location: | Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Paired article numbers: | BCA7263 |
Rudder type: | Cross arm |
Features of execution 8: | With rubber bearing, Without swing joint / swing arm |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Manufacturing material: | Sheet steel |
Paired article numbers: | 51863 |
Required amount: | 1 |
Rudder type: | Cross arm |
Lever location: | Cross arm |
Location: | Rear axle |
Location in the car: | Front, Left, Lower, Rear axle left, Rear axle right, Right |
Location on the axis: | Lower |
Weight, kg]: | 0.57 |
Cone size [mm]: | 15.4 |
Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
Location: | Front axle |
Location in the car: | Left |
Manufacturing material: | Sheet steel |
Outside thread [mm]: | M12 x 1,50 rht m |
Required amount: | 1 |
Rudder type: | Cross arm |
unit of measurement: | Set |
Height [mm]: | 60 |
Length [mm]: | 341 |
Lever location: | Cross arm |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Max. length [mm]: | 431 |
Paired article numbers: | V-588S |
Weight, kg]: | 3.206 |
Location in the car: | Rear Axle Lower |
Paired article numbers: | TRC2445 |
Location in the car: | Front axle right |
Location: | Front axle |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.