Paired article numbers: | FCA6889 |
Rudder type: | Cross arm |
Lever location: | Cross arm |
Location: | Front axle |
Location in the car: | Left, Right |
Rudder type: | Cross arm |
Features of execution 8: | Without ball joint |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Rudder type: | Cross arm |
Weight, kg]: | 3.790016 |
Cone size [mm]: | 23.5 |
Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
Packing height [cm]: | 12 |
Packing length [cm]: | 50 |
Packing width [cm]: | 39 |
Paired article numbers: | L29B11 |
Required amount: | 1 |
Rudder type: | Cross arm |
Weight, kg]: | 4.485 |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Height [mm]: | 80 |
Length [mm]: | 565 |
Location in the car: | Front axle left |
Paired article numbers: | LVSA1771 |
Rudder type: | Cross arm |
Location in the car: | Rear axle double-ended |
Length [mm]: | 361 |
Location in the car: | Left |
Paired article numbers: | Ssw1058.01 |
Rudder type: | Cross arm |
Location in the car: | Lower |
Location in the car: | Behind |
Length [mm]: | 297.8 |
Location in the car: | Left and right, Rear axle |
Mounting points diameter [mm]: | 12.2, 14.3 |
Required amount: | 2 |
Location in the car: | Lower, Rear axle, Right |
Features of execution 8: | With independent suspension joint / swing arm |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Quality: | Wp |
Rudder type: | Cross arm |
Height [mm]: | 124 |
Length [mm]: | 269.9 |
Lever location: | Cross arm |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Max. length [mm]: | 498 |
Paired article numbers: | V-549 |
Thread size 1: | M12 x 1,5 |
Weight, kg]: | 3.572 |
Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
Manufacturing material: | Sheet steel |
Required amount: | 1 |
Rudder type: | Cross arm |
Additional Information: | With bracket |
Build type: | Pre-assembly |
Cone size [mm]: | 15.3 |
Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Manufacturing material: | Sheet steel |
Mounting points diameter [mm]: | 12.2 |
Outside thread [mm]: | M12 x 1,50 rht m |
Required amount: | 1 |
Rudder type: | Cross arm |
unit of measurement: | Set |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.