Inner diameter [mm]: | 40.5, 41.5 |
Location in the car: | Right lower, Right upper |
Part type: | Cooling system branch pipe |
Required amount: | 1 |
Weight [g]: | 235 |
Cooling wiring: | From engine to engine radiator |
Location in the car: | Upper |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Part type: | Cooling system branch pipe |
Length [mm]: | 260 |
Location in the car: | Left, Top left |
Manufacturing material: | Epdm (ethylene propylene rubber) |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber), EPDM (ethylene propylene diene rubber) |
Part type: | Cooling system branch pipe |
Required amount: | 1 |
Weight [g]: | 180 |
Location in the car: | Upper |
Part type: | Cooling system branch pipe |
Weight [g]: | 220, 248 |
Inner diameter [mm]: | 40.5, 41.5 |
Location in the car: | Right, Right lower, Right upper |
Part type: | Cooling system branch pipe |
Required amount: | 1 |
Weight [g]: | 235 |
Location in the car: | Front axle |
Material: | Polymer material |
Weight [g]: | 35 |
Weight [g]: | 50 |
not for article number: | 2178 |
Manufacturing material: | Polymer |
Material: | Polymer material |
Required amount: | 1 |
Cooling wiring: | From radiator to water pipe |
Length [mm]: | 800 |
Location in the car: | Bottom left |
Manufacturing material: | Epdm (ethylene propylene rubber) |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Part type: | Cooling system branch pipe |
Required amount: | 1 |
Weight [g]: | 210 |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length [mm]: | 235 |
Manufacturing material: | Epdm (ethylene propylene rubber) |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber), EPDM (ethylene propylene diene rubber) |
Part type: | Cooling system branch pipe |
Required amount: | 1 |
Weight [g]: | 75 |
Length [mm]: | 235 |
Manufacturing material: | Epdm (ethylene propylene rubber) |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Part type: | Cooling system branch pipe |
Required amount: | 1 |
Weight [g]: | 75 |
Additional Information: | Without layer pad |
Manufacturing material: | Polymer |
Material: | Polymer material |
Cooling wiring: | From thermostat to engine radiator |
Location in the car: | Lower |
Part type: | Cooling system branch pipe |
Manufacturing material: | Polymer |
Material: | Polymer material |
Required amount: | 1 |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length [mm]: | 330 |
Location in the car: | Left, Top left |
Manufacturing material: | Epdm (ethylene propylene rubber) |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber), EPDM (ethylene propylene diene rubber) |
Part type: | Cooling system branch pipe |
Required amount: | 1 |
Weight [g]: | 240 |
Length [mm]: | 350 |
Location in the car: | Right lower |
Manufacturing material: | Epdm (ethylene propylene rubber) |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Part type: | Cooling system branch pipe |
Required amount: | 1 |
Weight [g]: | 470 |
Location in the car: | Upper |
Part type: | Cooling system branch pipe |
Weight [g]: | 201, 204 |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.