Cooling wiring: | From motor to thermostat |
Part type: | Cooling system branch pipe |
Length [mm]: | 410 |
Location in the car: | Left, Top left |
Part type: | Cooling system branch pipe |
Required amount: | 1 |
Weight [g]: | 230 |
Length [mm]: | 250 |
Manufacturing material: | Epdm (ethylene propylene rubber) |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Part type: | Cooling system branch pipe |
Required amount: | 1 |
Weight [g]: | 110 |
Additional Information: | With gasket |
Location in the car: | Cylinder head |
Manufacturing material: | Polymer |
Material: | Polymer material |
Location in the car: | Engine Block, Left |
Manufacturing material: | Polymer |
Material: | Polymer material |
Required amount: | 1 |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Location in the car: | Front, Left |
Location in the car: | Upper |
Length [mm]: | 260 |
Location in the car: | Top left |
Manufacturing material: | Epdm (ethylene propylene rubber) |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Part type: | Cooling system branch pipe |
Required amount: | 1 |
Weight [g]: | 180 |
Location in the car: | Side hitch |
Cooling wiring: | Throttle body to cylinder head |
Length [mm]: | 250 |
Manufacturing material: | Epdm (ethylene propylene rubber) |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Part type: | Cooling system branch pipe |
Weight [g]: | 110 |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length [mm]: | 320 |
Location in the car: | Right lower |
Manufacturing material: | Epdm (ethylene propylene rubber) |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Part type: | Cooling system branch pipe |
Required amount: | 1 |
Weight [g]: | 250 |
Length [mm]: | 330 |
Location in the car: | Top left |
Manufacturing material: | Epdm (ethylene propylene rubber) |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Part type: | Cooling system branch pipe |
Required amount: | 1 |
Weight [g]: | 240 |
Location in the car: | Upper |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Part type: | Cooling system branch pipe |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.