Part type: | Cooling system branch pipe |
Cooling wiring: | From the stove radiator to the water pipe |
Manufacturing material: | Rubber with fabric inclusion |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Part type: | Cooling system branch pipe |
Location in the car: | Upper |
Material: | Rubber with textile reinforcement |
Manufacturing material: | Polymer |
Material: | Polymer material |
Required amount: | 1 |
Location in the car: | Thermostat |
Location in the car: | Upper |
Part type: | Cooling system branch pipe |
Weight [g]: | 140 |
not for article number: | 5038 |
Location in the car: | Cylinder head, Left |
Additional Information: | With gasket |
Cooling wiring: | От корпуса регулятора охлаждающей жидкости к всасыв. разд. |
Manufacturing material: | Rubber with fabric inclusion |
Material: | Rubber with textile reinforcement |
Part type: | Cooling system branch pipe |
Part type: | Cooling system branch pipe |
Inner diameter: | 18 |
Inner diameter [mm]: | 18 |
Length [mm]: | 113 |
Part type: | Cooling system branch pipe |
Required amount: | 1 |
Weight [g]: | 41 |
Location in the car: | Flywheel side, Left |
Cooling wiring: | From water pump to water pipe |
Part type: | Cooling system branch pipe |
Weight [g]: | 48, 51 |
Cooling wiring: | From engine to oil cooler |
Part type: | Cooling system branch pipe |
Manufacturing material: | Polymer |
Material: | Polymer material |
Required amount: | 1 |
Cooling wiring: | From the stove radiator to the water pipe |
Manufacturing material: | Rubber with fabric inclusion |
Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Part type: | Cooling system branch pipe |
Manufacturing material: | Polymer |
Material: | Polymer material |
Required amount: | 1 |
Location in the car: | Front |
Manufacturing material: | Polymer |
Material: | Polymer material |
Required amount: | 1 |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.