Bolt diameter [mm]: | 18 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter 1 [mm]: | 43 |
Outside diameter 2 [mm]: | 38,4 |
Required amount: | 2 |
Cone size [mm]: | 14.8 |
Cone slope: | 1/10 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter [mm]: | 38.3 |
Type of admission: | TÜV/GS tested |
Cone size [mm]: | 15 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter 1 [mm]: | 39,85 |
Outside diameter 2 [mm]: | 46,5 |
Outside thread [mm]: | M12 x 1,25 rht m |
Type of admission: | TÜV/GS tested |
Cone size [mm]: | 17 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Paired article numbers: | G3-817 |
Type of admission: | TÜV/GS tested |
Cone size [mm]: | 14 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside thread [mm]: | M12 x 1,25 rht m |
Type of admission: | TÜV/GS tested |
Additional Information: | With accessories, With additional materials |
Bolt diameter [mm]: | 18 |
Cone size [mm]: | 18 |
Dust protection: | Dust-proof |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter 1 [mm]: | 38,2, 38.2 |
Outside diameter 2 [mm]: | 44,4 |
Outside diameter [mm]: | 44.4 |
Required amount: | 2 |
Rudder type: | For wishbone |
Type of admission: | TÜV/GS tested |
Cone size [mm]: | 18 |
Location: | Front axle |
Location on the axis: | Lower |
Outer thread 1 [mm]: | M16 x 1,50 rht m |
Outer thread 2 [mm]: | M45 x 1,50 rht m |
Rudder type: | For wishbone |
Cone size [mm]: | 18 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Type of admission: | TÜV/GS tested |
Cone size [mm]: | 18 |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Outer thread 1 [mm]: | M16 x 1,50 rht m |
Outer thread 2 [mm]: | M45 x 1,50 lht m |
Rudder type: | For wishbone |
Cone size [mm]: | 20.3, 20.5 |
Cone slope: | 1/10 |
Inner diameter [mm]: | 11 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mounting points diameter [mm]: | 11 |
Number of fixing holes: | 2 |
Outside thread [mm]: | M16 x 1,50 |
Required amount: | 2 |
Type of admission: | TÜV/GS tested |
Cone size [mm]: | 16.5, 17.5 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Type of admission: | TÜV/GS tested |
Bolt diameter [mm]: | 24 |
Build type: | Pressed |
Chassis: | For vehicles without increased ground clearance |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter 1 [mm]: | 49,6, 49.6 |
Outside diameter 2 [mm]: | 43,5, 43.5 |
Required amount: | 2 |
Rudder type: | For wishbone |
Additional Information: | With additional materials |
Bolt diameter [mm]: | 18 |
Cone size [mm]: | 18 |
Hole diameter [mm]: | 8.5 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Number of fixing holes: | 3 |
Required amount: | 2 |
Type of admission: | TÜV/GS tested |
Cone size [mm]: | 19 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Paired article numbers: | G3-118 |
Type of admission: | TÜV/GS tested |
Cone size [mm]: | 14.5 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Outside thread [mm]: | M12 x 1,50 rht m |
Cone size [mm]: | 15.5 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Mount type: | Hanging |
Outside diameter 1 [mm]: | 40,1 |
Outside diameter 2 [mm]: | 43,8 |
Required amount: | 2 |
Alternative repair kit: | G3-1112 |
Cone size [mm]: | 15.05 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter 1 [mm]: | 40 |
Outside diameter 2 [mm]: | 47,1 |
Required amount: | 2 |
Cone size [mm]: | 14.75 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Outside thread [mm]: | M14 x 1,50 rht m |
Rudder type: | For wishbone |
Type of admission: | TÜV/GS tested |
Additional Information: | Without fixing rack |
Cone size [mm]: | 14.4 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter 1 [mm]: | 49,25, 49.25 |
Outside diameter [mm]: | 54 |
Outside thread [mm]: | M12 x 1,50 rht m |
Type of admission: | TÜV/GS tested |
Bolt diameter [mm]: | 17 |
Build type: | Pressed |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter 1 [mm]: | 38,4 |
Outside diameter 2 [mm]: | 46,3 |
Required amount: | 2 |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.