Car with left- / right-hand drive: | For left-hand drive |
Distance between fixing holes [mm]: | 410 |
Features of execution 3: | Quadrangular |
Input rod diameter [mm]: | 18.5 |
Input rod height [mm]: | 37 |
Manufacturer limitation: | Trw |
Overall length [mm]: | 1290 |
Type of operation: | Hydraulic |
Axial joint thread size: | M14x1,5 |
Car with left- / right-hand drive: | For left-hand drive |
Connetor: | Clamping Clip, Clamping ring |
Distance between fixing holes [mm]: | 520 |
Features of execution 3: | Not toothed |
Features of execution 8: | With sensor |
Input rod diameter [mm]: | 17.8 |
Input rod height [mm]: | 42 |
Lift height [mm]: | 130 |
Overall length [mm]: | 1092 |
Type of operation: | Hydraulic |
Car with left- / right-hand drive: | For left-hand drive |
Type of operation: | Hydraulic |
Axial joint length [mm]: | 252 |
Axial joint thread size: | M14x1,5 |
Car with left- / right-hand drive: | For left-hand drive |
Distance between fixing holes [mm]: | 320 |
Features of execution 3: | toothed |
Input rod diameter [mm]: | 17.3 |
Input rod height [mm]: | 28 |
Number of fixing holes: | 2 |
Number of teeth on input shaft: | 40 |
Overall length [mm]: | 1213 |
Thread size: | 12 |
Thread type, axial hinge: | Internal thread |
Type of operation: | Hydraulic |
Car with left- / right-hand drive: | For left-hand drive |
Connector length [mm]: | 33 |
Features of execution 8: | Without axial joint |
Manufacturer limitation: | Zf |
Number of teeth on input shaft: | 36 |
Overall length [mm]: | 616 |
Type of operation: | Hydraulic |
Car with left- / right-hand drive: | For left-hand drive |
Distance between fixing holes [mm]: | 325 |
Equipment / equipment: | For vehicles without Servotronic control drive, For vehicles without power steering. Servotronic control |
Features of execution 3: | toothed |
Input rod diameter [mm]: | 17.5 |
Input rod height [mm]: | 64 |
Manufacturer limitation: | Mb |
Number of teeth on input shaft: | 54 |
Overall length [mm]: | 1155 |
Type of operation: | Hydraulic |
Car with left- / right-hand drive: | For left-hand drive |
Manufacturer limitation: | Trw |
Type of operation: | Hydraulic |
Car with left- / right-hand drive: | For left-hand drive |
Distance between fixing holes [mm]: | 380 |
Features of execution 3: | toothed |
Input rod diameter [mm]: | 17.3 |
Input rod height [mm]: | 115 |
Number of teeth on input shaft: | 40 |
Overall length [mm]: | 1247 |
Type of operation: | Hydraulic |
Axial joint length [mm]: | 252 |
Axial joint thread size: | M14 x 1,5, M14x1,5 |
Car with left- / right-hand drive: | For left-hand drive |
Distance between fixing holes [mm]: | 320 |
Features of execution 3: | toothed |
Features of execution 8: | Without slave cylinder, power steering |
Input rod diameter [mm]: | 17 |
Input rod height [mm]: | 20 |
Manufacturer limitation: | Psa |
Number of fixing holes: | 2 |
Number of teeth on input shaft: | 36 |
Overall length [mm]: | 1208 |
Thread size: | 12 |
Thread type, axial hinge: | Internal thread |
Type of operation: | Hydraulic |
Car with left- / right-hand drive: | For left-hand drive |
Manufacturer limitation: | Visteon |
Type of operation: | Hydraulic |
Car with left- / right-hand drive: | For left-hand drive |
Manufacturer limitation: | Trw |
Type of operation: | Hydraulic |
Car with left- / right-hand drive: | For left-hand drive |
Distance between fixing holes [mm]: | 395 |
Features of execution 3: | toothed |
Input rod diameter [mm]: | 18.8 |
Input rod height [mm]: | 29 |
Manufacturer limitation: | Trw |
Number of teeth on input shaft: | 23 |
Overall length [mm]: | 1225 |
Type of operation: | Hydraulic |
Car with left- / right-hand drive: | For left-hand drive |
Connecting thread: | M16x1,5 / m18x1,5 |
Manufacturer limitation: | Trw |
Type of operation: | Hydraulic |
Car with left- / right-hand drive: | For left-hand drive |
Input rod height [mm]: | 44 |
Manufacturer limitation: | Trw |
Type of operation: | Hydraulic |
Car with left- / right-hand drive: | For left-hand drive |
Type of operation: | Hydraulic |
Car with left- / right-hand drive: | For left-hand drive |
Distance between fixing holes [mm]: | 270 |
Features of execution 3: | toothed |
Input rod diameter [mm]: | 17.5 |
Input rod height [mm]: | 44 |
Manufacturer limitation: | Trw |
Number of teeth on input shaft: | 54 |
Overall length [mm]: | 1150 |
Type of operation: | Hydraulic |
Car with left- / right-hand drive: | For left-hand drive |
Features of execution 3: | toothed |
Features of execution 8: | Without axial joint |
Input rod diameter [mm]: | 18 |
Input rod height [mm]: | 52 |
Manufacturer limitation: | Trw |
Number of teeth on input shaft: | 18 |
Overall length [mm]: | 560 |
Type of operation: | Hydraulic |
Car with left- / right-hand drive: | For left-hand drive |
Manufacturer limitation: | Trw |
Type of operation: | Hydraulic |
excluding manufacturers: | Seikigiken |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.