Cone size [mm]: | 15 |
Location: | Front axle |
Location in the car: | Left |
Paired article numbers: | G6-503 |
Rudder type: | Cross arm |
Location: | Front axle |
Location in the car: | Left, Right |
Rudder type: | Cross arm |
Bolt diameter [mm]: | 16 |
Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
Location: | Front axle |
Location in the car: | Left |
Manufacturing material: | Sheet steel |
Mounting points diameter [mm]: | 12.2, 12.5 |
Paired article numbers: | G6-1120 |
Required amount: | 1 |
Rudder type: | Cross arm |
Cone size [mm]: | 15.9 |
Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
Length [mm]: | 521 |
Location: | Rear axle |
Location in the car: | Left |
Location on the axis: | Lower |
Manufacturing material: | Sheet steel |
Mounting points diameter [mm]: | 12.5 |
Paired article numbers: | G5-873 |
Required amount: | 1 |
Rudder type: | Cross arm |
type of instalation: | Rubber-metal support, Silentblock |
Cone size [mm]: | 18.6 |
Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
Length [mm]: | 312 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturing material: | Table casting |
Mounting points diameter [mm]: | 12.2, 12.5 |
Outside thread [mm]: | M16 x 1,50 rht m |
Required amount: | 2 |
Rudder type: | Cross arm |
Cone size [mm]: | 18 |
Equipment / equipment: | For vehicles without power steering |
Length [mm]: | 385 |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Paired article numbers: | G5-037 |
Rudder type: | Cross arm |
Type of admission: | TÜV/GS tested |
Bolt diameter [mm]: | 13.8 |
Cone size [mm]: | 13.1, 13.12 |
Features of execution 8: | With independent suspension joint / swing arm |
Length [mm]: | 332.5, 333 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Upper |
Manufacturing material: | Table casting |
Outer thread 1 [mm]: | M12 x 1,25 rht m |
Outer thread 2 [mm]: | M12 x 1,25 rht m |
Paired article numbers: | G5-781 |
Required amount: | 1 |
Rudder type: | Cross arm |
Bolt diameter [mm]: | 17.5 |
Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Manufacturing material: | Sheet steel |
Paired article numbers: | G6-1362 |
Rudder type: | Cross arm |
Bolt diameter [mm]: | 14.1 |
Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
Length [mm]: | 306 |
Lever location: | Cross arm |
Location: | Front axle, Rear axle |
Location in the car: | Right |
Location on the axis: | Upper |
Manufacturing material: | Aluminum |
Mounting points diameter [mm]: | 12.2 |
Outside thread [mm]: | M14 x 1,50 rht m |
Paired article numbers: | G5-724 |
Required amount: | 1 |
Rudder type: | Cross arm |
type of instalation: | Rubber-metal support, Silentblock |
Location: | Front axle, Rear axle |
Location in the car: | Right |
Location on the axis: | Upper |
Paired article numbers: | G5-698 |
Rudder type: | Trailing arm |
Type of admission: | TÜV/GS tested |
Cone size [mm]: | 16.3 |
Cone slope: | 1/10 |
Length [mm]: | 435 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower, Upper |
Manufacturing material: | Steel |
Mount type: | Sustainable |
Mounting points diameter [mm]: | 14.2 |
Paired article numbers: | G7-569 |
Required amount: | 1 |
Rudder type: | Cross arm |
type of instalation: | Silentblock |
Bolt diameter [mm]: | 16 |
Length [mm]: | 268 |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Upper |
Manufacturing material: | Aluminum |
Mounting points diameter [mm]: | 10.2 |
Paired article numbers: | G5-850 |
Required amount: | 1 |
Rudder type: | Cross arm |
Type of admission: | TÜV/GS tested |
Cone slope: | 1/6 |
Length [mm]: | 322,4 |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Mount type: | Sustainable |
Mounting points diameter [mm]: | 12.1 |
Paired article numbers: | G5-633 |
Required amount: | 1 |
Rudder type: | Cross arm |
Type of admission: | TÜV/GS tested |
type of instalation: | Silentblock |
Features of execution 8: | With rubber bearing, Without swing joint / swing arm |
Hole diameter [mm]: | 10.3 |
Length [m]: | 440 |
Length [mm]: | 290,9 |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Manufacturing material: | Table casting |
Mounting points diameter [mm]: | 12.2 |
Overall length [mm]: | 440 |
Paired article numbers: | G5-654 |
Required amount: | 1 |
Rudder type: | Cross arm |
Bolt diameter [mm]: | 14.1 |
Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
Length [mm]: | 306 |
Location: | Front axle, Rear axle |
Location in the car: | Left |
Location on the axis: | Upper |
Manufacturing material: | Aluminum |
Mounting points diameter [mm]: | 12.2 |
Outside thread [mm]: | M14 x 1,50 rht m |
Paired article numbers: | G5-723 |
Required amount: | 1 |
Rudder type: | Cross arm |
type of instalation: | Rubber-metal support, Silentblock |
Bolt diameter [mm]: | 16 |
Length [mm]: | 268 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Upper |
Manufacturing material: | Aluminum |
Mounting points diameter [mm]: | 10.2 |
Paired article numbers: | G5-851 |
Required amount: | 1 |
Rudder type: | Cross arm |
Type of admission: | TÜV/GS tested |
Bolt diameter [mm]: | 18 |
Features of execution 8: | With independent suspension joint / swing arm, With rubber bearing |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Manufacturing material: | Sheet steel |
Mounting points diameter [mm]: | 12.1, 12.2 |
Paired article numbers: | G6-649 |
Required amount: | 1 |
Rudder type: | Cross arm |
Cone size [mm]: | 16 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Paired article numbers: | G6-813 |
Rudder type: | Cross arm |
Location: | Front axle, Rear axle |
Location in the car: | Right |
Location on the axis: | Lower |
Paired article numbers: | G5-744 |
Rudder type: | Trailing arm |
Features of execution 8: | With rubber bearing |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Upper |
Manufacturing material: | Aluminum |
Paired article numbers: | G5-679 |
Rudder type: | Cross arm |
Type of admission: | TÜV/GS tested |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.