Cone size [mm]: | 14.9 |
Cone slope: | 1/10 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Manufacturer restriction 2: | 3 x m8 |
Thread size 1: | Mm14x1,5r, Mm14x1.5r |
Cone size [mm]: | 14.3 |
Cone slope: | 1/8 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Thread size: | Mm38x1.5r |
Thread size 1: | Mm12x1,5r, Mm12x1.5r |
Cone size [mm]: | 19.5 |
Cone slope: | 1/8 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | 4 x m12 |
Cone size [mm]: | 15.1 |
Cone slope: | 1/5 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Thread size 1: | Mm14x1,5r, Mm14x1.5r |
Cone size [mm]: | 19.6 |
Cone slope: | 1/8 |
Diameter [mm]: | 46,5 |
Features of execution 8: | Special mounting hardware required, With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | Circlip |
Outside diameter [mm]: | 46.5 |
Recommended special tool number: | R10065 |
Cone size [mm]: | 18 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower, Upper |
Manufacturer restriction 2: | 2 x m12 |
Cone size [mm]: | 13 |
Cone slope: | 1/8 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | 3 x m8 |
Thread size 1: | Mm12x1,5r, Mm12x1.5r |
Cone size [mm]: | 18 |
Diameter [mm]: | 46,3 |
Features of execution 8: | Special mounting hardware required |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter [mm]: | 46.3 |
Recommended special tool number: | R10082 |
Cone size [mm]: | 14.5 |
Cone slope: | 1/10 |
Diameter [mm]: | 40 |
Features of execution 8: | Special mounting hardware required, With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | Circlip |
Outside diameter [mm]: | 40 |
Recommended special tool number: | R10036 |
Thread size 1: | Mm12x1,5r, Mm12x1.5r |
Cone size [mm]: | 16 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | 3 x m10 |
Cone size [mm]: | 17.6 |
Cone slope: | 1/8 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Thread size 1: | MM16X1,5R, Mm16x1.5r |
Cone size [mm]: | 19 |
Location: | Front axle |
Location in the car: | Left |
Location on the axis: | Lower |
Paired article numbers: | 37583 |
Cone size [mm]: | 19.5 |
Cone slope: | 1/8 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | 4 x m12 |
Thread size 1: | MM16X1,5R, Mm16x1.5r |
Cone size [mm]: | 17.8 |
Cone slope: | 1/8 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | 3 x m10 |
Thread size 1: | MM18x1,5R, Mm18x1.5r |
Cone size [mm]: | 15.3 |
Cone slope: | 1/6 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | 3 x m12 |
Thread size 1: | Mm14x1,5r, Mm14x1.5r |
Cone size [mm]: | 17.4 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Recommended special tool number: | R10063 |
Thread size 1: | MM16X1,5R |
Cone size [mm]: | 19.5 |
Cone slope: | 1/8 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Cone size [mm]: | 14 |
Diameter [mm]: | 40,3 |
Location: | Front axle |
Location in the car: | Left, Right |
Recommended special tool number: | R10078 |
Thread size 1: | Mm12x1,25r |
Cone size [mm]: | 16.5 |
Cone slope: | 1/10 |
Diameter [mm]: | 41 |
Features of execution 8: | Special mounting hardware required |
Location: | Front axle |
Location in the car: | Left, Right |
Outside diameter [mm]: | 41 |
Recommended special tool number: | R10081 |
Cone size [mm]: | 20 |
Location: | Front axle |
Location in the car: | Left, Right |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.