Cone size [mm]: | 13 |
Cone slope: | 1/6 |
Diameter [mm]: | 33 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter [mm]: | 33 |
Thread size 1: | Mm10x1,25r, Mm10x1.25r |
Cone size [mm]: | 23.2 |
Cone slope: | 1/5 |
Location: | Front axle, Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Cone size [mm]: | 20.5 |
Cone slope: | 1/6 |
Features of execution 8: | Special mounting hardware required, With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | Circlip |
Outside diameter [mm]: | 45.1 |
Recommended special tool number: | R10116 |
Thread size 1: | M16x2r |
Cone size [mm]: | 14.6 |
Cone slope: | 1/5 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Manufacturer restriction 2: | 2 x m7 + 2 x m10 |
Thread size 1: | Mm12x1,5r, Mm12x1.5r |
Cone size [mm]: | 14.7 |
Cone slope: | 1/6 |
Diameter [mm]: | 42,1 |
Features of execution 8: | Special mounting hardware required, With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Manufacturer restriction 2: | Circlip |
Outside diameter [mm]: | 42.1 |
Recommended special tool number: | R10114 |
Thread size 1: | Mm14x1,5r, Mm14x1.5r |
Cone size [mm]: | 17.6 |
Cone slope: | 1/8 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | 4 x m12 |
Thread size 1: | MM16X1,5R, Mm16x1.5r |
Cone size [mm]: | 18 |
Equipment option: | Plus kit |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location on the axis: | Lower |
Manufacturer restriction 2: | 2 x m10 + plate |
Cone size [mm]: | 21.6 |
Cone slope: | 1/8 |
Location: | Front axle |
Location in the car: | Left, Right |
Thread size 1: | Mm20x1,5r, Mm20x1.5r |
Cone size [mm]: | 17.7 |
Cone slope: | 1/6 |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Paired article numbers: | 45292 |
Thread size 1: | Mm14x1,5r, Mm14x1.5r |
Cone size [mm]: | 11.3 |
Cone slope: | 1/10 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Manufacturer restriction 2: | 3 x m6 |
Thread size 1: | Mm10x1,25r, Mm10x1.25r |
Inner diameter [mm]: | 12.1 |
Location: | Front axle, Rear axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter [mm]: | 47 |
Overall length [mm]: | 52 |
Cone size [mm]: | 19.5 |
Cone slope: | 1/8 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | 3 x m10 |
Thread size 1: | MM18x1,5R, Mm18x1.5r |
Cone size [mm]: | 22 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | 3x m12x30 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Cone size [mm]: | 17 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | 3 x m7 |
Cone size [mm]: | 15 |
Cone slope: | 1/8 |
Features of execution 8: | Special mounting hardware required, With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | Ring |
Outside diameter [mm]: | 42.8 |
Recommended special tool number: | R10067 |
Thread size 1: | Mm12x1,25r |
Cone size [mm]: | 17.5 |
Cone slope: | 1/6 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Manufacturer restriction 2: | 3 x m12 |
Thread size 1: | Mm14x1,5r, Mm14x1.5r |
Cone size [mm]: | 18 |
Diameter [mm]: | 40 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | Ring |
Outside diameter [mm]: | 40 |
Cone size [mm]: | 11.5 |
Cone slope: | 1/5 |
Features of execution 8: | Special mounting hardware required |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter [mm]: | 38.5 |
Recommended special tool number: | R10080 |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.