Cone size [mm]: | 15.9 |
Cone slope: | 1/8 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | 3 x m12 |
Thread size 1: | Mm14x1,5r, Mm14x1.5r |
Cone size [mm]: | 13.5 |
Cone slope: | 1/8 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Manufacturer restriction 2: | 3 x m8 |
Thread size 1: | Mm12x1.5r |
Cone size [mm]: | 16.1 |
Cone slope: | 1/6 |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Paired article numbers: | 45286 |
Thread size 1: | Mm14x1.5r |
Cone size [mm]: | 17 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | 2 x m10 |
Paired article numbers: | 63480 |
Cone size [mm]: | 14.9 |
Cone slope: | 1/8 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | 3 x m8 |
Thread size 1: | Mm14x1,5r, Mm14x1.5r |
Cone size [mm]: | 19 |
Location: | Front axle |
Location in the car: | Right |
Location on the axis: | Lower |
Paired article numbers: | 37582 |
Cone size [mm]: | 15.5 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Thread size 1: | Mm12x1,25r |
Cone size [mm]: | 16 |
Location: | Front axle |
Location in the car: | Left, Right |
Manufacturer restriction 2: | 3x m10x25 |
Cone size [mm]: | 18.2 |
Location: | Front axle |
Location in the car: | Left, Right |
Thread size 1: | Mm12x1,5r |
Cone size [mm]: | 16.6 |
Location: | Front axle |
Location in the car: | Left, Right |
Thread size 1: | Mm14x1,5r |
Cone size [mm]: | 17.5 |
Cone slope: | 1/6 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | 3 x m12 |
Thread size 1: | Mm14x1,5r, Mm14x1.5r |
Cone size [mm]: | 18.9 |
Cone slope: | 1/6 |
Diameter [mm]: | 44,5 |
Features of execution 8: | Special mounting hardware required |
Location: | Front axle |
Location on the axis: | Lower |
Outside diameter [mm]: | 44.5 |
Recommended special tool number: | R10116 |
Thread size 1: | MM16X1,5R, Mm16x1.5r |
Cone size [mm]: | 18 |
Diameter [mm]: | 40 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | Ring |
Outside diameter [mm]: | 40 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Cone size [mm]: | 11.5 |
Cone slope: | 1/5 |
Features of execution 8: | Special mounting hardware required |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Outside diameter [mm]: | 38.5 |
Recommended special tool number: | R10080 |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Cone size [mm]: | 16 |
Features of execution 8: | Special mounting hardware required |
Location: | Front axle |
Location on the axis: | Upper |
Recommended special tool number: | R10082 |
Cone size [mm]: | 20 |
Cone slope: | 1/10 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Lower |
Manufacturer restriction 2: | 3 x m10 |
Thread size 1: | MM18x1,5R, Mm18x1.5r |
Cone size [mm]: | 19.8 |
Cone slope: | 1/10 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location on the axis: | Upper |
Manufacturer restriction 2: | 2 x m10 |
Thread size 1: | MM18x1,5R, Mm20x1.5r |
Cone size [mm]: | 21.4 |
Cone slope: | 1/8 |
Features of execution 8: | With reinforcing material |
Location: | Front axle |
Location in the car: | Left, Right |
Location on the axis: | Upper |
Manufacturer restriction 2: | 3 x m8 |
Thread size 1: | MM16X1,5R, Mm16x1.5r |
Dubai • Sharjah • Abu Dhabi • Mussafah • Al Quoz • Ajman • Fujairah • Ras Al-Khaimah • Al Ain • Umm Al-Quwain and others.